Pulse combustion, recognized as one of the most efficient ways to burn gas, is almost more like an internal combustion engine than a traditional furnace. Gas and air are drawn into a combustion chamber and ignited by an electronic spark.
The design created positive pressure inside the heat exchanger, whereas the high efficiency furnace designs of today use an inducer fan to “pull” combusted gasses through a primary and secondary heat exchanger. Although Lennox built the Pulse models with heavy duty materials, they noticed a high rate of reported heat exchanger failures.
Pulse 21 Name on the Furnace Access Door: To identify a Pulse furnace, look for its name on the door. If the unit is a Pulse 21 furnace, it was manufactured after 1990 and is not part of the inspection program. For those with Lennox furnaces without the Pulse 21 name, the next step is to remove the front door and look for the name tag.
In the mid-1990’s there was a large recall of Pulse furnaces due to serious leaks in the heat exchangers. Questions about this model? See who made our list of the best Furnaces of 2021.
Do they still make pulse furnaces?
The Lennox Pulse is a discontinued gas furnace with an AFUE of up to 95.5%.
How does Lennox Pulse furnace work?
The hottest development in home heating technology today is a super-efficient process known as ’’pulse combustion. ’’ Pioneered by Lennox Industries in 1982, the G14 Pulse furnace has an AFUE–the Annual Fuel Utilization Efficiency rating–of 97.
When did Lennox stop making the pulse furnace?
A professional on hvac-talk.com shared a statement from Lennox in 2011 that the company would no longer be producing replacement parts for the Pulse units.
Are Lennox Pulse furnaces any good?
Although Lennox built the Pulse models with heavy duty materials, they noticed a high rate of reported heat exchanger failures. As a result, Pulse furnaces produced between 1982 and 1989 were subject to recalls for cracked heat exchangers introducing carbon monoxide to the indoor air.
How much is a heat exchanger for a Lennox furnace?
The average cost of a Lennox heat exchanger replacement is between $1500-$2500. If your Lennox furnace is past its warranty it may be best to consider a furnace replacement. Although you could replace a heat exchanger, all of the other parts on the furnace are aged as well.
What is a Lennox Pulse furnace?
The Pulse was a brand of Lennox furnace that has been replaced by more modern models, but was one of their primary gas furnace products in the 1980s. Because gas furnaces are not frequently replaced, homes may still have these residential furnaces.
How do you reset a Lennox Pulse furnace?
Turn the pilot light switch from the “On” position to the “Off” position. Give the furnace about 3 to 5 minutes so that any lingering gas can dissipate. Next, turn the pilot knob to the “Pilot” position and then simultaneously press down and hold the “Reset” button located on the side of it.
What would cause a furnace not to kick on?
If your furnace is not turning on you should first check if the filter is clean. Dirty filters cause insufficient airflow and can prevent the furnace from starting. Other reasons it won’t start can stem from improper thermostat settings, forgetting to turn on the gas line, or faulty pilot light.
Why is my Lennox furnace not heating?
Sometimes, if the flame sensor is dirty, it will fail to detect a flame. Try cleaning the flame sensor with a fine abrasive pad. If the furnace still doesn’t heat, replace the flame sensor. The draft inducer motor draws air into the heat exchanger and then exhausts it out the flue.
How long does a Lennox Pulse furnace Last?
Air conditioners and heat pumps last an average of 10 to 12 years, while furnaces have a life span of around 15 to 20 years, although a number of factors, including previous maintenance and the climate you live in may impact your system’s life span.
Why does my furnace start and stop start and stop?
This behavior is caused by something cutting short each furnace cycle since your furnace is being forced into a short cycle to keep your home the temperature set on your thermostat. A furnace that is sized properly for your home should start and stop 3-8 times in an hour.
Why does my furnace ignite then shut off?
Flame Sensor This key component senses when the flame is on. It then alerts the control board to begin blowing warm air. Often, dust or dirt covers the sensor. If this happens, the sensor won’t detect the flame, and the result is the furnace shuts down.
More Answers On What is a pulse furnace
Lennox Pulse Furnace Reviews | FurnaceCompare
The Lennox Pulse is a discontinued gas furnace with an AFUE of up to 95.5%. The unit had an automotive-type spark plug ignitor used on the initial cycle only, which helped save energy, and worked on the pulse principle, meaning it did not require a pilot burner, main burners, conventional flue or chimney.
Pulse furnace – ROMA Heating Cooling Ltd Service Repair
Pulse furnace What is a pulse furnace? Pulse combustion furnaces are completely different from conventional or even energy efficient furnaces. … Gas and air are drawn into a combustion chamber and ignited by an electronic spark. Between 60 and 70 pulses of the air/gas mixture are ignited per second producing rapid burning and a pressurized pulse.
Lennox Pulse furnaces – Pro-Tech Home Inspection Services
These units are known for their distinctive “pulsating” sound produced when running, which sounds somewhat like a small internal combustion engine when heard from the exhaust termination on the outside of the house.
How does a Lennox Pulse Furnace work? – AskingLot.com
The Pulse furnace brings in gas through a gas line of its own, connected to the primary supply for the house. This line has a gas valve that opens — with orders from the thermostat — and sends a steady supply of gas to the burner when necessary. Click to see full answer. Similarly, it is asked, how does a Lennox furnace work?
Pulse-Fire 101 – An Introduction to Pulse-fire Combustion Systems
More than anything else, pulse-fire is a method of introducing heat into a gas-fired furnace. Traditional modulating systems use valves to control the range of heat; the burners are always firing, at greater or lesser intensities.
Lennox Recall: Lennox Pulse Furnace Safety Problems, Recall, Safety …
A Pulse furnace can be identified by its name on the door. To determine whether your Pulse furnace should be inspected under this program: 1. Check for the Pulse name on the door. If the unit is a Pulse 21 furnace, it was manufactured after 1990 and is not part of this inspection program.
What are the different types of furnaces? HVAC Solutions
Jan 4, 2022What is a furnace? A furnace is one of the main components of your HVAC system. When you set your thermostat, you activate the furnace to begin heating air. A fan switches on and circulates the warm air through your home. How the heat is transferred to the air depends on the type of furnace.
How long does a Lennox Pulse Furnace Last? – AskingLot.com
The Pulse furnace brings in gas through a gas line of its own, connected to the primary supply for the house. This line has a gas valve that opens — with orders from the thermostat — and sends a steady supply of gas to the burner when necessary. Where is the filter on a Lennox Pulse Furnace?
How Pulse Fired High-Velocity Furnace Works? – Arvind Corrotech
The furnace is used for high-velocity fuel circulation. The pulsed fired high-velocity furnace gives long kettle life. It is free of maintenance, and it can be operated with low excess air. Last Thought, With the standard framework, tough material, and proficient heater the pulsed fired high-volume furnace is good to use in zinc galvanizing plant.
Lennox Pulse Furnace Safety FAQs – InspectAPedia
The original Lennox furnace safety inspection program ran through July 1, 1999. If the warranted heat exchanger needed replacing, Lennox indicated that the company would provide a new heat exchanger at no cost to the owner. Labor costs for replacement parts are not part of the Pulse furnace warranty.
Anyone heard of the lennox pulse furnace? – Hearth.com Forums Home
Lennox Pulse furnace heat exchangers were modeled after the German V-2 rockets from WW2,they stopped making them back in the mid 90`s due to faults with the welds on the heat exchangers. They had a program for a while where the heat exchanger was pressure tested and checked for leaks.
US4995376A – Pulse furnace – Google Patents
A furnace is provided for combusting liquid or gaseous fuel which has a combustion assembly with an internal cavity that has a mixing chamber and a combustion chamber. A flame tube is disposed intermediate the mixing chamber and the combustion chamber. The combustion assembly has an outlet which is adapted to exhaust the gases which result from combustion of the air-fuel mixture.
Age of Lennox Pulse Furnace – InterNACHI®️ Forum
Newer ones are first two equals manufacturing plant #, 2nd two are year and letter in fifth slot is month (A thru M minus I). So 5898G 07568 would be Plant # 58, Year of MFR would be 98 and month would be July. I need help with the age of Lennox Pulse furnace. MODEL # G14Q415-100-6. Thanks in advance for all your help.
need help on a Lennox Pulse furnace – hvac-talk.com
Pulse furnace is an awesome furnace as long as the heat exchanger doesnt go bad and you need special equipment to test. DO NOT TRY TO FIRE THIS FURNACE WITH AIR DOOR OFF THAT COVERS THE AIR FLAPPER. if a pulse has air,gas and ignitor, it will fire up.
lennox pulse – HVAC-Talk: Heating, Air & Refrigeration Discussion
Thread: lennox pulse. When I was in colorado from 2000 to 2002 in the denver area, I remember working on these lennox gas fired funaces I believe was called the pulse. Everyone dis-liked these units. they fired with a spark plug like from a car, had a flapper on the intake that often needed changed, and the units when running were very noisy!
I bought a house with an old Lennox Pulse furnace and am getting …
The pulse furnaces that passed the checks will likely outlive us all, given adequate supply of flapper kits. I have five in my service area that passed routine inspection every two years for the eight years I worked for that shop. If it’s been thoroughly checked by a reputable mechanic I’d keep it and run it until the HX cracks which will …
The Basics of Pulse Firing | 2011-10-03 | Industrial Heating
The primary purpose of a furnace is to provide heat to the product or load, so basic knowledge of desired furnace heat-transfer characteristics helps in understanding why and how pulse firing can be beneficial. Enlarged Image Fig. 1. Efficiency gains outside of firing method Furnace Heat Transfer
Pulse Firing and Furnace Pressure Pulse firing does make furnace pressure control a bit more difficult, but with proper equipment and engineering this challenge is easily overcome. • Flue sizing • Good pressure control equipment • For multi-flue furnace, barometric dampers in conjunction with set point controlled dampers.
Lennox pulse 21 – ROMA Heating Cooling Ltd Service Repair
The Pulse furnace brings in gas through a gas line of its own, connected to the primary supply for the house. This line has a gas valve that opens — with orders from the thermostat — and sends a steady supply of gas to the burner when necessary. Book Online NOW & Get a FREE Quote ROMA™ | 20 Years Trust Most Trusted Heating Service in BC
Pulse Furnace Parts – Page 1 – Technical Hot & Cold
Note: For use on Lennox Pulse Furnaces. This is an aftermarket replacement for the Lennox 64K60.Includes:(1) – Flame Sensor (E5-I-10-25)Specifications:Manufacture: Auburn/Westwood ProductsSensor Length: 2 1/2″Note: Will have to cut sensor to length…
Lennox Pulse G14 – DIY Home Improvement Forum
If your pulse has clicked 3 times, you will need to reset the breaker before doing this test. Breaker should be on before test. Need to turn fan to ON, not AUTO on thermostat. Go to your furnace, take off both the top and bottom doors to the furnace. Push the saftey pin in on the right side where the bottom door was.
Pulse tube refrigerator – Wikipedia
The pulse tube refrigerator (PTR) or pulse tube cryocooler is a developing technology that emerged largely in the early 1980s with a series of other innovations in the broader field of thermoacoustics.In contrast with other cryocoolers (e.g. Stirling cryocooler and GM-refrigerators), this cryocooler can be made without moving parts in the low temperature part of the device, making the cooler …
Lennox 43G62 Pulse Furnace Unit Ignition Spark Plug Champion
Lennox 43G62 Pulse Furnace Unit Ignition Spark Plug Champion – we have 1 of these pulse furnace ignition spark plugs available with Free Shipping.
How Pulse Fired High-Velocity Furnace Works? – Arvind Corrotech
The Pulse Fired High-Velocity Furnace is used in the galvanized plant, as it is designed for the maximum heat transfer in minimum fuel. There are several galvanizing plant manufacturers, make the furnace among the pre-process tank, Polypropylene Tank. The furnace is viable with various fuels like Oil, LPG, and Natural Gas and it is used to heat …
What are the different types of furnaces? HVAC Solutions
Types of furnaces. There are four main types of furnaces: natural gas, oil, electric, and propane. Electric furnaces can heat the air by exposing heated elements, while other types of furnaces typically require a heat exchanger or chamber that warms the surrounding air. Finally, the thermostat signals the furnace to shut off when the set …
Lennox Pulse furnace – Inspecting HVAC Systems – InterNACHI®️ Forum
The Lennox Pulse furnace safety inspection is free, but if the furnace has to be cleaned in order to be inspected, the customer could be charged for the cleaning. To identify a Pulse furnace, look for its name on the door. If the unit is a Pulse 21 furnace, it was manufactured after 1990 and is not part of the inspection program.
Lennox Pulse Furnace Safety FAQs – InspectAPedia
The original Lennox furnace safety inspection program ran through July 1, 1999. If the warranted heat exchanger needed replacing, Lennox indicated that the company would provide a new heat exchanger at no cost to the owner. Labor costs for replacement parts are not part of the Pulse furnace warranty.
Anyone heard of the lennox pulse furnace? – Hearth.com Forums Home
Western MA. Dec 13, 2011. #4. Lennox Pulse furnace heat exchangers were modeled after the German V-2 rockets from WW2,they stopped making them back in the mid 90`s due to faults with the welds on the heat exchangers. They had a program for a while where the heat exchanger was pressure tested and checked for leaks.
Pulse Furnace Parts – Page 1 – Technical Hot & Cold
Note: For use on Lennox Pulse Furnaces. This is an aftermarket replacement for the Lennox 64K60.Includes:(1) – Flame Sensor (E5-I-10-25)Specifications:Manufacture: Auburn/Westwood ProductsSensor Length: 2 1/2″Note: Will have to cut sensor to length…
prolem with lennox pulse furnace — Heating Help: The Wall
thanks thanks to all, i have the pulse furnace heat exchanger test kit and have used it several times.this furnace’s heat exchanger seems to be ok, but i feel at this point replacement is the only option. i was able to get it to fire when i went back to measure up for a new furnace. this furnace’s has become less reliable that replacement is the best option. the only saving grace is that this …
Resource
https://www.furnacecompare.com/mfr/lennox/furnaces/pulse/
https://www.romaheating.ca/pulse-furnace/
https://inspectionhomepros.com/blog/2019/02/21/lennox-pulse-furnaces/
https://askinglot.com/how-does-a-lennox-pulse-furnace-work
https://www.combustion911.com/blog/industrial-burners/pulse-fire-101-introduction/
https://inspectapedia.com/heat/Lennox_Pulse_Furnace_Notice.php
https://www.hvac.com/furnaces/types-of-furnaces/
https://askinglot.com/how-long-does-a-lennox-pulse-furnace-last
https://www.arvindcorrotech.com/how-pulse-fired-high-velocity-furnace-works/
https://inspectapedia.com/heat/Lennox-Pulse-Furnace-Safety-FAQs.php
https://www.hearth.com/talk/threads/anyone-heard-of-the-lennox-pulse-furnace.77969/
https://patents.google.com/patent/US4995376A/en
https://forum.nachi.org/t/age-of-lennox-pulse-furnace/26523
https://hvac-talk.com/vbb/threads/147524-need-help-on-a-Lennox-Pulse-furnace
https://hvac-talk.com/vbb/threads/119818-lennox-pulse
https://www.reddit.com/r/HVAC/comments/4n75ty/i_bought_a_house_with_an_old_lennox_pulse_furnace/
https://www.industrialheating.com/articles/90249-the-basics-of-pulse-firing
https://ceramics.org/wp-content/uploads/2011/05/palkovic-pulse-firing.pdf
https://www.romaheating.ca/lennox-pulse-21/
https://www.technicalhotandcoldparts.com/pulse-furnace-parts/
https://www.diychatroom.com/threads/lennox-pulse-g14.168368/
https://en.wikipedia.org/wiki/Pulse_tube_refrigerator
https://www.ebay.com/itm/284872519399
https://www.arvindcorrotech.com/how-pulse-fired-high-velocity-furnace-works/
https://www.hvac.com/furnaces/types-of-furnaces/
https://forum.nachi.org/t/lennox-pulse-furnace/14943
https://inspectapedia.com/heat/Lennox-Pulse-Furnace-Safety-FAQs.php
https://www.hearth.com/talk/threads/anyone-heard-of-the-lennox-pulse-furnace.77969/
https://www.technicalhotandcoldparts.com/pulse-furnace-parts/
https://forum.heatinghelp.com/discussion/148747/prolem-with-lennox-pulse-furnace