Convert your inches to tenths, keeping in mind that a tenth is one tenth of a foot, which is 12 inches–a tenth, therefore, is 12/10 or 1.2 inches. If you measure your water heater’s circumference as 144 inches, for example, you can convert it to tenths as follows: 144/1.2 = 120 tenths.
Have you ever wondered: “What is 38ths of an inch?” Well, if you do, you have come to the right place. In this article, we’ll discuss the measurement and how it can be converted. There are several different ways to measure inches. Here, we’ll use metric tape measures to explain how to read them. These tape measures have a graduation system that changes size with each fraction. The largest mark on a metric tape measure indicates one millimeter, while the smallest mark is a tenth of an inch.
The conversion between metric and imperial units is straightforward. In the metric system, 3/8ths equals three and a half inches, while 5/8 is equivalent to 2.54 centimeters and 1.587 centimetres. In the common sense, 3/8ths are approximately one-half of an inch. A fraction of an inch is equal to nine and a half millimetres.
What is an 1/8 inch in decimal?
Convert your inches to tenths, keeping in mind that a tenth is one tenth of a foot, which is 12 inches–a tenth, therefore, is 12/10 or 1.2 inches. If you measure your water heater’s circumference as 144 inches, for example, you can convert it to tenths as follows: 144/1.2 = 120 tenths.
How do you measure tenths of an inch?
Converting Tenths of a Foot to Inches To calculate how many inches in the measurement you have, multiply the decimal by 12. For example, if the measurement is 100.2 feet, multiply 0.2 by 12 to get 2.4 inches.
What fraction is 1/8 of an inch?
Answer: . 35 as a fraction would be written as 7/20.
What fraction is .35 inches?
Convert fractions of inches to their decimal equivalents. For example, the measurement of 6 feet 3 3/8 inches includes a fraction of an inch — 3/8. Divide the numerator by the denominator to find the decimal fraction of an inch — that is, 3 divided by 8 equals 0.375 inches.
What measurement is 1/10 of an inch?
Read along the ruler, starting at the “zero” mark, until you reach the far edge of whatever you’re measuring. Note where that edge falls between the centimeter marks (the large, numbered marks on the tenths or metric side of any ruler).
What decimal is 1/8 of an inch?
18=0.125 .
What is 1/8 as a fraction?
The markings on a standard ruler represent the fractions of an inch. The markings on a ruler from the start to the 1″ mark are: 1u204416″, 1u20448″, 3u204416″, 1u20444″, 5u204416″, 3u20448″, 7u204416″, 1u20442″, 9u204416″, 5u20448″, 11u204416″, 3u20444″, 13u204416″, 7u20448″, 15u204416″, and 1″.
What is the decimal for 3/8 of an inch?
18=0.125 .
What is the decimal for 1/8 of an inch?
Answer: 3/16 as a decimal is equal to 0.1875.
What is the decimal for 3/16 of an inch?
Answer: 3/4 is expressed as 0.75 in the decimal form. Let’s convert the given fraction to a decimal number.
What is 1/10 of an inch on a ruler?
Tenths. In machining, where the thou is often treated as a basic unit, 0.0001 inches (2.54 micrometres) can be referred to as “one tenth”, meaning “one tenth of a thou” or “one ten thousandth”. (The metric comparison is discussed below.)
What is a 10th of an inch?
1/10 – One Tenth Or . 1. Conversion Chart / Fractions and Percentage Converter, Fractions ** one tenth or . 1: 1.
What is 1 tenth of an inch in fraction?
Read along the ruler, starting at the “zero” mark, until you reach the far edge of whatever you’re measuring. Note where that edge falls between the centimeter marks (the large, numbered marks on the tenths or metric side of any ruler).
What is 1/8 as a decimal in fraction?
1 Answer. 18=0.125 .
What is .8 of an inch in fraction?
The decimal form of 1/8 can be found by dividing 1 by 8 or by making the denominator a power of 10. 1 divided by 8 is 0.125.
How do you calculate 1/8 of a number?
Answer: 1/8 of a number can be found by dividing the number by 8. So 14 divided by 8 gives 1.75.
More Answers On What Is 38ths Of An Inch
What is 3/8ths of an inch? – arjuna.unusualperson.com
Furthermore, what is 3 8th of an inch in CM? 3/8 inches into cm: 3/8 inches are equal to 3/8 x 2.54 = 0.9525 centimeters. Also to know is, what is 3/8ths of an inch in MM? Conversion Table inches to mm What does 5/8 of an inch look like? Five-eighths inch on a ruler is a mark past 1/2 inch and before 1 inch.
What is 3 8th of an inch? – Answers
Q: What is 3 8th of an inch? Write your answer… Submit Continue Learning about General Science How many mm is one eighth of an inch? 1/8th inch is 3.175 mm How many centimeters in 3 quarters of a…
Inch Fraction Calculator – Convert Decimal to Inches
Round this to the nearest whole number; in this case, 11.12 can be rounded to 11. Put that in a fraction over 16, so 11/16 is the remaining inch fraction. Put it all together by placing the whole inches (2) in front of the inch fraction. 2.695 in = 2 11/16. Thus, using this method, you can see that 2.695 decimal inches is equal to 2 11 / 16 as …
3/8 inch to mm – Converter Maniacs
Moreover, there are 25.4 millimeters per inch. Therefore, to convert the inch as a decimal to millimeters, we multiply the inch as a decimal by 25.4 to get our answer. Here is the answer with the math that shows you how to convert 3/8 inch to mm: 3 / 8 = 0.375 0.375 x 25.4 = 9.525 3/8 inch = 9.525 mm inch to mm Converter
Convert 3/8 inch to mm – Conversion of Measurement Units
An inch is the name of a unit of length in a number of different systems, including Imperial units, and United States customary units. There are 36 inches in a yard and 12 inches in a foot. The inch is usually the universal unit of measurement in the United States, and is widely used in the United Kingdom, and Canada, despite the introduction of metric to the latter two in the 1960s and 1970s …
What does 3/8 look like on a ruler? – AskingLot.com
The 1/8 of an inch marks are the smaller marks found directly in between the 1/4 of an inch marks on the ruler. Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch. In total, there are 96 of these marks on a 12 inch ruler. what is 1/3 of an inch on a ruler? You lay the ruler at an angle to the line along …
Convert inches to mm
An inch was defined to be equivalent to exactly 25.4 millimeters in 1959. There are 12 inches in a foot and 36 inches in a yard. History/origin: The term “inch” was derived from the Latin unit “uncia” which equated to “one-twelfth” of a Roman foot. There have been a number of different standards for the inch in the past, with the current definition being based on the international yard. One of …
Inches to CM Converter – RapidTables.com
How many inches in a centimeter. One centimeter is equal to 0.3937 inches: 1cm = 1cm / 2.54cm/in = 0.3937in. How many centimeters in an inch. One inch is equal to 2.54 centimeters: 1in = 2.54cm/in × 1in = 2.54cm. How to convert 10 inches to centimeterss. Multiply 10 inches by 2.54 to get centimeters: 10in = 2.54cm/in × 10in = 25.4cm
Conversion Table: fractional inches, decimal inches, mm
Conversion Table: fractional inches, decimal inches, mm. This page was written by Steven J. DeRose (via Ruby) on 2003-03-28, and was last updated on 2003-03-28. This table of equivalents should be useful for drill bit sizes, wrench and socket sizes, etc.
Where is .3 of an inch on a ruler? – Quora
Answer (1 of 12): There is no .3 inch mark on a ruler, unless you happen to find one in tenths, which I’ve never heard of. Only metric are in 10ths. Rulers and tape measures are in 1/2, 1/4, 1/8, 1/16, 1/32, and some in 1/64th gradients. The closest you can get to .3 inches is 19/64 of an inch. W…
How many mm is 3/8ths of an inch? – Encyclopedia
Accordingly, How many mm is 1 inch and 3 4? 3/4 inch = 19.05 mm. Also, What is the metric size for a 3 8? Metric / Standard Wrench Conversion Chart
Inches to mm converter – RapidTables.com
How many inches in a millimeter. One millimeter is equal to 0.03937 inches: 1mm = 1mm / 25.4mm/in = 0.03937in. How many millimeters in an inch. One inch is equal to 25.4 millimeters: 1in = 25.4mm/in × 1in = 25.4mm. How to convert 10 inches to millimeterss. Multiply 10 inches by 25.4 to get millimeters: 10in = 25.4mm/in × 10in = 254mm
How many mm is 3/8ths of an inch? – Encyclopedia
All screws are listed by diameter but the terms used for different types of screws vary. A 3/8″-16 screw is a machine screw, the “3/8” is the diameter and the “16” is the number of threads per inch. This screw will thread into a nut or threaded hole. What size is a 3/4 bolt in metric? Table 3. How do I measure 3/8 Cup?
Inches to Points Conversion – How Many Points in an Inch?
Inch is an imperial and United States Customary systems length unit. 1 inch = 72 points. The symbol is ” in “. Please visit all length units conversion to convert all length units. Create Conversion Table. Click “Create Table”. Enter a “Start” value (5, 100 etc). Select an “Increment” value (0.01, 5 etc) and select “Accuracy” to round the result.
Convert 3/8 inches to cm – Conversion of Measurement Units
An inch is the name of a unit of length in a number of different systems, including Imperial units, and United States customary units. There are 36 inches in a yard and 12 inches in a foot. The inch is usually the universal unit of measurement in the United States, and is widely used in the United Kingdom, and Canada, despite the introduction of metric to the latter two in the 1960s and 1970s …
How many mm is 4 16ths of an inch? – Encyclopedia
To convert 4/16 inch to mm you have to multiply 4/16 by 25.4 as one inch equals 25.4 mm. Now you know that 4/16 in mm = 6.35 millimeters. Likewise, How many millimeters is an inch and 7 16?
How many eighths are in 3 ½ inches? – Quora
Answer (1 of 2): There’s a variety of ways to figure out how many eights in 3 1/2 inches. One way is, there are 8/8’s in one inch. So 3 inches would have 24/8ths. And then, since there are 8/8ths in one inch, cut that in half and there are 4/8’s in a half inch. So 24 plus 4 is 28. So there are 28…
What is an inch and 3/8 in metric? – Encyclopedia
Fractional Inches to Decimal Inches and Metric Millimeters Inches Metric Fractional Decimal mm . 0.3740 9.5000 3/8 0.3750 9.5250 25/64 0.3906 9.9219 Likewise, What is…
What is 5/8 of an inch as a decimal? – Encyclopedia
Decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch Inches fractional decimal 1/2 0.500 5/8 0.625 3/4 0.750 Likewise, How many rulers is…
What size is 2 mm in inches? – WikiBox
MM Approximate Size In Inches Exact Size In Inches 2mm 1/16 Inch 0.07874 Inches 3mm 3/32 Inch 0.11811 Inches 4mm 1/8 Inch 0.15748 Inches 5mm 3/16 Inch 0.19685 Inches equally, What is a 30 mm socket in standard size? Wrench Size And Conversion Table Inches Millimeters Spanner 1.181 30mm 30mm 1.200 11/16 Wworth; 3/4 BSF
Convert inches to mm
An inch was defined to be equivalent to exactly 25.4 millimeters in 1959. There are 12 inches in a foot and 36 inches in a yard. History/origin: The term “inch” was derived from the Latin unit “uncia” which equated to “one-twelfth” of a Roman foot. There have been a number of different standards for the inch in the past, with the current definition being based on the international yard. One of …
How much is 3/8 of an inch in mm? | AnandTech Forums: Technology …
Well to be fair google doesn’t list all the secret conversion things on the front page. Google “5*18” and it’ll give you the answer “90” from google calculator, same as if you google “128 pounds in kilograms” or “3/8 inches in mm”.
Conversion Table: fractional inches, decimal inches, mm
Conversion Table: fractional inches, decimal inches, mm. This page was written by Steven J. DeRose (via Ruby) on 2003-03-28, and was last updated on 2003-03-28. This table of equivalents should be useful for drill bit sizes, wrench and socket sizes, etc.
Inches to CM Converter – RapidTables.com
How many inches in a centimeter. One centimeter is equal to 0.3937 inches: 1cm = 1cm / 2.54cm/in = 0.3937in. How many centimeters in an inch. One inch is equal to 2.54 centimeters: 1in = 2.54cm/in × 1in = 2.54cm. How to convert 10 inches to centimeterss. Multiply 10 inches by 2.54 to get centimeters: 10in = 2.54cm/in × 10in = 25.4cm
Are there any accepted fractions of an inch that go smaller than x/64?
Answer (1 of 4): In machine workshop practice they usually switch to powers of ten, so they might use hundredths occasionally, but thousandths are more common, usually abbreviated to ‘thou’. You might set your spark plug gaps to 15 thou. In highly accurate machine work you might use tenths or hun…
Font Size Guide – Convert Points to Inches | LabelValue
Taking our previous example, which uses 3/8 of an inch as the minimum height requirement of the font, you will still have to go to a larger font size than 27 pt, if you are using lowercase letters. Depending on the amount that the letters like “d” ascend from the x-height, the “d” may very well be 3/8 of an inch at 27 points, while a plain “c” or “x” will be much less because they have no …
What Size Is a Battery Terminal? Car, Marine Terminal Sizes
The positive terminal comes in at 3/8ths of an inch while the negative comes in at 5/16ths of an inch. The unique feature of many of the marine battery’s terminals is that they come with a 3/8ths inch stud that uses a wing nut to make the proper connection. This wing nut design is said to be faster and easier to use than normal battery …
What does 5/8 look like on a ruler? – AskingLot.com
One may also ask, what is 5/8 of an inch on a ruler? Five-eighths inch on a ruler is a mark past 1/2 inch and before 1 inch. If the ruler divides the inches into eighths, 5/8 inch is the fifth mark on the ruler from the left side. If the ruler divides the inches into 16ths, it is the 10th mark. What does the black diamond on a tape measure mean …
How many mm is 3/8ths of an inch? – Encyclopedia
Accordingly, How many mm is 1 inch and 3 4? 3/4 inch = 19.05 mm. Also, What is the metric size for a 3 8? Metric / Standard Wrench Conversion Chart
How many mm is 3/8ths of an inch? – Encyclopedia
Conversion table inches to mm Dimensions — Inches to Metric 0.375″ 3/8″ 9.53 mm 0.438″ 7/16″ 11.13 mm 0.500″ 1/2″ 12.70 mm 0.563″ 9/16″ 14.30…
Resource
https://arjuna.unusualperson.com/what-is-38ths-of-an-inch
https://www.answers.com/general-science/What_is_3_8th_of_an_inch
https://www.inchcalculator.com/inch-fraction-calculator/
https://convertermaniacs.com/fractional-inch-to-millimeter/convert-3/8-inch-to-mm.html
https://www.convertunits.com/from/3/8+inch/to/mm
https://askinglot.com/what-does-38-look-like-on-a-ruler
https://www.unitconverters.net/length/inches-to-mm.htm
https://www.rapidtables.com/convert/length/inch-to-cm.html
http://www.derose.net/steve/resources/engtables/englishmetric.html
https://www.quora.com/Where-is-3-of-an-inch-on-a-ruler?share=1
https://crobat.dvrdns.org/how-many-mm-is-3-8ths-of-an-inch-20/
https://www.rapidtables.com/convert/length/inch-to-mm.html
https://crobat.dvrdns.org/how-many-mm-is-3-8ths-of-an-inch-13/
https://www.asknumbers.com/inches-to-points.aspx
https://www.convertunits.com/from/3/8+inches/to/cm
https://crobat.dvrdns.org/how-many-mm-is-4-16ths-of-an-inch-2/
https://www.quora.com/How-many-eighths-are-in-3-%C2%BD-inches?share=1
https://crobat.dvrdns.org/what-is-an-inch-and-3-8-in-metric-6/
https://crobat.dvrdns.org/what-is-5-8-of-an-inch-as-a-decimal-4/
https://wikibox.org/en/what-size-is-2-mm-in-inches/
https://www.unitconverters.net/length/inches-to-mm.htm
https://forums.anandtech.com/threads/how-much-is-3-8-of-an-inch-in-mm.37726/
http://www.derose.net/steve/resources/engtables/englishmetric.html
https://www.rapidtables.com/convert/length/inch-to-cm.html
https://www.quora.com/Are-there-any-accepted-fractions-of-an-inch-that-go-smaller-than-x-64?share=1
https://www.labelvalue.com/blog/label-design/font-size-guide-convert-points-to-inches
https://thecampingadvisor.com/what-size-is-a-battery-terminal/
https://askinglot.com/what-does-58-look-like-on-a-ruler
https://crobat.dvrdns.org/how-many-mm-is-3-8ths-of-an-inch-20/
https://crobat.dvrdns.org/how-many-mm-is-3-8ths-of-an-inch-13/