A part of the suggested span transcript after expanded is Your toilet requires a round seat a measurement of 18 and a half inches. Means your toilet will need an elongated seat.
Does it matter if the toilet seat overhangs?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
How should a toilet seat fit?
You want it down…all the way, every time you flush. If you leave the lid up when you flush, those germs can float around your bathroom, landing on any available surface, including towels, hairbrushes or even toothbrushes.
Should a toilet seat hang over a toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
Can I use an elongated toilet seat?
An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.
How is a toilet seat supposed to fit?
Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl. If you have a round bowl, this dimension should be about 16.5 inches. If you have an elongated bowl, the measurement should be around 18 to 18.5 inches.
Why is there a gap between toilet seat and the toilet bowl?
The move was first brought in in the American Standard National Plumbing Code in 1955 and then later in the Uniform Plumbing Codes in 1973. The gap in the seat is meant to give the user a little breathing room to avoid touching the seat with your genitals and provide one less place where urine could splash.
How tight should a toilet seat be?
If the toilet lid and seat are longer or wider than the ceramic, the toilet seat may not sit right on the toilet, which causes noticeable and uncomfortable wobbling. At the same time, a seat that is too small will not completely cover the edges, again causing instability.
Should the toilet seat be down when the toilet is flushed?
Loo etiquette has a new standard: put the toilet lid down as well as the seat, because leaving the lid up when flushing could lead to bacterial and viral transmission.
Why is putting the toilet lid down a big deal?
Research has found that flushing the toilet with the lid down could reduce airborne particles by as much as 50%. In addition to the visible drops of water that are generated upon flushing the toilet, smaller droplets that are just micrometres (xb5M) in diameter also form and are propelled into the surrounding air.
What is etiquette for toilet seat up or down?
Should the toilet seat be up or down? It should always be down along with the lid. Not only is it common courtesy, it also traps germs in while flushing.
Do toilet seat sizes matter?
No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
Are elongated toilet seats more comfortable?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Is elongated toilet seat better than round?
If the toilet uses a flush that circulates the water in the bowl using force, the elongated shape of the toilet may provide slightly better pressure. However, in other types of flush technology, there is no difference between the two.
Can I put a bigger toilet seat?
Can you? Sure. The holes where it attaches to the toilet are the same size.
Do all toilet seats fit the same?
The move was first brought in in the American Standard National Plumbing Code in 1955 and then later in the Uniform Plumbing Codes in 1973. The gap in the seat is meant to give the user a little breathing room to avoid touching the seat with your genitals and provide one less place where urine could splash.
Why is there a gap between toilet seat and bowl?
Keep KIDS and ADULTS from peeing through the gap between the toilet seat and bowl. Potty training without the mess! Keeps kids from peeing through the gap between the toilet seat and bowl. Keeps potty training kids’ clothes dry and increases their self-esteem during their potty training phase.
More Answers On Should A Toilet Seat Overhang
Should a toilet seat overhang? – AskingLot.com
Should a toilet seat overhang? The Swash may extend slightly over the front edge of your toilet bowl. Measure the distance from the front of the toilet tank to the front of the toilet bowl. A distance less than 19.4 inches from the tank to the front of the toilet bowl will also cause overhang. Click to see full answer.
Should you leave your toilet seat up or down? – VictoriaPlum.com
Putting the toilet seat down There are at least 4 good reasons to put the toilet seat down… 1. Avoid the plume If you haven’t heard of toilet plume then this is a good time to take note. Once you have used the flushing mechanism on the toilet the waste will be washed away by water down into the sewer and away from your home.
Fitting toilet seats – Selwood Housing
Ensure the toilet seat covers the bowl completely, there should not be a gap around the edge and it should not overhang. Step 3: thread the nuts onto the bolts located underneath the edge of the side of the toilet bowl.
Toilet Seat Fit & Size Guide | Measuring Toilet Seats | Brondell
How to measure for a Swash toilet seat. Measure the distance between the bolt holes. The space must be between 5-1/4 inches and 8 inches. Please note: to properly fit SE400, SE600, … A distance less than 19.4 inches from the tank to the front of the toilet bowl will also cause overhang.
Should you cover toilet seats before using at your home?
Answer (1 of 13): I don’t know if you are male or female, but if you are a male with really bad aim, or either gender and experience explosive diarrhea, you could I suppose. But with regular cleaning once or twice a week (or after an explosive event) should be adequate. FYI-Did you know you have…
Will any toilet seat fit my toilet? – FindAnyAnswer.com
There are industry standards for toilet seats – all toilets have seat post holes on 5 1/2″ centers – all elongated bowls are 18 1/2″ from seat posts to front of rim, and all round bowls are 16 1/2″. Any manufacturer’s seats will fit any toilet manufacturers bowls if they are standard round or standard elongated. Click to see full answer
Everything You Need To Know About Toilet Seats | Drench
Jun 17, 2021Remove your current toilet seat first. Measure from post hole to post hole at the back of the seat area. Calculate the width of the bowl where it is the widest Measure from the front of the toilet seat back to the post holes. These measurements tell you what size you need. Toilet seats will show the width and depth in millimetres.
Why You Should Never Squat Over the Toilet Seat
Mar 3, 2021″In order for the bladder to completely empty, the pelvic floor muscles have to be let go.” As you squat over the seat, she says, your pelvic floor muscles are probably still 30% or 40% tensed….
Round vs Elongated Toilet Seat – Best Osmosis Experts
May 11, 2022Measuring from the wall to the center of the sewer drain, elongated toilet require a little extra distance of 1 or 2 inches longer though the standard distance is 12 inches. When it comes to the front, typically one needs at least 21-inches in front to pass the building codes for both the elongated and the round toilet.
Should You Caulk Around the Toilet? – Bob Vila
Jul 23, 2021Caulking around the toilet adds stability on uneven floors. Bolts are usually used to secure the toilet base to the floor, but if the floor is uneven, the toilet can rock back and forth. This is …
Standard Overhang on a Bathroom Counter – Hunker
Dec 6, 2021The standard overhang for a bathroom countertop is about 1 to 1 1/2 inches from the cabinet. A bathroom countertop that is surrounded by walls is typically flush with the boundaries and has no overhang except the inch or more in the front. Bathroom Countertop Overhang Edge Styles A basic eased overhang is the most common countertop edge.
Are all toilet seats the same? – askinglot.com
KOHLER Rutledge Elongated Toilet Seat. How much does it cost to replace toilet seat? On average, the cost to replace a toilet ranges between $122 and $228, with most homeowners spending around $150 to $180. This does not include the price of the toilet, which averages $99 to $199, for a total toilet replacement cost of $221 to $427.
Does Ace Hardware Carry Toilet Seats? – Papersdude.com
May 24, 2022An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat. Can you put a bigger toilet seat on a small toilet? Elongated bidet seats and round versions share the same rear end where all the internal components are stored.
How do you measure a toilet seat Australia? – TreeHozz.com
Feb 6, 2022A distance less than 19.4 inches from the tank to the front of the toilet bowl will also cause overhang. … A good toilet seat should be flexible and can last as long as 20 years or more. Usually there may be a problem with the plastic bolts keeping the seat in place, …
Are toilet seats a standard size? | VictoriaPlum.com
Different toilets require different seats. Modern toilets, of course, come in a range of styles. Close coupled designs, where the pan is connected closely to the cistern, are far and away the most popular, but you can also find back to wall toilets, wall hung toilets, along with the period style high level toilet.. These types of toilet can then vary greatly by shape (square, angular, round, D …
Overhang for shower bench, shower curb and inset vanity – Houzz
For a shower curb our overhangs are typically 1/4″ or under on the inside and outside – very similar to this picture… For Inset doors on a vanity I would do 1/2 – 3/4″ . On full overlay doors if a vanity was 21″ deep, the top would be 22 1/2″.
Do Round Toilet seats come in different sizes? – TreeHozz.com
Apr 4, 2022Read rest of the answer. Keeping this in view, how do you measure for a replacement toilet seat? Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl.If you have a round bowl, this dimension should be about 16.5 inches.If you have an elongated bowl, the measurement should be around 18 to 18.5 inches. …
The Scientific Reason Why the Toilet Seat Should Be Left Down
A Male Economist’s Manifesto on the Toilet Seat Etiquette.”. The essay divulges Choi’s research on the matter of “up or down” and this is the essence of what he found: In case you’re not, you know, a scientific genius, Choi’s formula basically relies on the fact that the men and women arguing over the seat are sharing the same toilet.
Toilet Seat Fit & Size Guide | Measuring Toilet Seats | Brondell
How to measure for a Swash toilet seat. Measure the distance between the bolt holes. The space must be between 5-1/4 inches and 8 inches. Please note: to properly fit SE400, SE600, … A distance less than 19.4 inches from the tank to the front of the toilet bowl will also cause overhang.
Are Raised Toilet Seats Safe? – Papersdude.com
Research suggests more than 42% of seniors in the U.S. could benefit from the addition of bathroom equipment to their homes designed to help them maintain independence, dignity and safety 1. A raised toilet seat can help a person better navigate their bathroom —the site of most home-based accidents and injuries.
The seat cover we got for our new toilet… maybe we should swap with the …
The seat cover we got for our new toilet… maybe we should swap with the short seat ? … That’s just asking for overhang dribble, I’d be careful. 3. Reply. Share. … (at least in the US, internationally there are a lot more types) Always look carefully before getting a new seat. I highly recommend taking a picture if you are incapable of …
3 Ways to Fit a Toilet Seat – wikiHow
Lift away the seat once you’ve removed the nuts. Keep the nuts in case you lose one of the nuts that come with the new toilet seat. If the bolts aren’t permanently attached to the seat hinges, keep them just in case as well. 3. Measure from the bolt holes to the front of the bowl opening.
Question: Will Elongated Toilet Seat Fit Standard Toilet
An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat. Can you put an elongated seat on a regular toilet? An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat …
Top Five Mistakes When Buying A Bidet Toilet Seat
We have compiled a list of top five mistakes people make when buying a bidet toilet seat so you can learn from them. 0 items ($0.00 in total) Checkout My account 1-800-663-8755 Weekdays 11AM – 6PM est
Do all Kohler elongated toilet seats fit? – FindAnyAnswer.com
A distance less than 19.4 inches from the tank to the front of the toilet bowl will also cause overhang. … A good toilet seat should be flexible and can last as long as 20 years or more. Usually there may be a problem with the plastic bolts keeping the seat in place, …
Standard Overhang on a Bathroom Counter – Hunker
Countertops are typically 21 inches deep to offer easy access to mirrors and sinks. The standard overhang for a bathroom countertop is about 1 to 1 1/2 inches from the cabinet. A bathroom countertop that is surrounded by walls is typically flush with the boundaries and has no overhang except the inch or more in the front.
Overhang for bench seat? – Houzz
Here is an overhead showing 15″ deep base units set 6″ away from wall, putting the fronts 21″ from wall which would make a 3″ overhang of seat. With seat top removed. I would just attach cleats to wall to hold up seat behind the cabinets. Then drop seat on top, Annette Holbrook (z7a) Original Author.
Amazon.com: Customer Questions & Answers
Hello, Sign in. Account & Lists Returns & Orders. Cart
10 Tips To Solve Dog’s Toilet Overhang | Pets Affections
Welcome! Log into your account. your username. your password
What is standard toilet size? | Cook It Quick!
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat. Can you replace a 12 inch rough-in toilet with a 10 inch rough-in toilet?
Resource
https://askinglot.com/should-a-toilet-seat-overhang
https://victoriaplum.com/blog/posts/leave-toilet-seat-up-or-down
https://www.selwoodhousing.com/repairs_tips_and_advice_categories/fitting-toilet-seats/
https://www.brondell.com/support/toilet-fit/
https://www.quora.com/Should-you-cover-toilet-seats-before-using-at-your-home?share=1
https://findanyanswer.com/will-any-toilet-seat-fit-my-toilet
https://www.drench.co.uk/blog/buying-guides/everything-you-need-to-know-about-toilet-seats
https://www.health.com/condition/incontinence/squatting-over-toilet-seat
https://www.bestosmosisexperts.com/round-vs-elongated-toilet-seats/
https://www.bobvila.com/articles/caulk-around-toilet/
https://www.hunker.com/13401004/standard-overhang-on-a-bathroom-counter
https://askinglot.com/are-all-toilet-seats-the-same
http://papersdude.com/useful/does-ace-hardware-carry-toilet-seats/
https://answersblurb.com/how-do-you-measure-a-toilet-seat-australia
https://victoriaplum.com/blog/posts/are-toilet-seats-a-standard-size
https://www.houzz.com/discussions/5866818/overhang-for-shower-bench-shower-curb-and-inset-vanity
https://answersblurb.com/do-round-toilet-seats-come-in-different-sizes
https://tiphero.com/toilet-seat-debate
https://www.brondell.com/support/toilet-fit/
http://papersdude.com/useful/are-raised-toilet-seats-safe/
https://www.reddit.com/r/mildlyinfuriating/comments/v3m373/the_seat_cover_we_got_for_our_new_toilet_maybe_we/
https://www.wikihow.com/Fit-a-Toilet-Seat
http://asklotz.airlinemeals.net/will-elongated-toilet-seat-fit-standard-toilet/
https://www.bidet.org/blogs/news/top-five-bidet-mistakes
https://findanyanswer.com/do-all-kohler-elongated-toilet-seats-fit
https://www.hunker.com/13401004/standard-overhang-on-a-bathroom-counter
https://www.houzz.com/discussions/4487543/overhang-for-bench-seat
https://www.amazon.com/ask/questions/asin/B00NAHULPE/5/?isAnswered=true
https://petsaffections.com/tips-tricks/10-solution-dogs-toilet-overhang/
http://yoos.nym.airlinemeals.net/otomotif-https-cookitquick.org/faq/what-is-standard-toilet-size/