How To Use Adat With Apollo Twin

More Answers On how to use adat with apollo twin

Apollo Twin ADAT, What are YOU using? – Gearspace.com

The DP88 will not sync with the Twin via ADAT. I just had a UA 4-710 hooked up the same way for a while without any issues, when I try to press the External Sync button until it’s red for ADAT, the power button LED just continues to blink. However, if I set the DP88 to Internal Clock, it seems to work and I get levels into the Twin.

Using External Digital Gear With Your Apollo (Digital Clocking Primer)

Apr 4, 2022At the bottom of the main Console window you will see the “RATE” field – choose the sample rate you are going to use here. Next, click the “CLOCK” field and set it to “INTERNAL” to use the Apollo as the master clock. It is probably a good idea to make sure that all of your ADAT and/or S/PDIF input channels are visible in Console at this time.

Which ADAT interface Should I Connect To My UAD Apollo Interface?

If your interface has ADAT (which all UAD interfaces do) you will be able to expand the amount of inputs and outputs by 8. Meaning a UAD Apollo Twin with two inputs and 4 outputs can be expanded to 10 inputs and 12 outputs. Which is ideal for users who want to record more inputs or add inserts such as EQ’s, compressors or summing.

Apollo Twin USB + ADAT Settings – Gearspace.com

The Apollo Twin does not have ADAT out. It only has digital in. You can still use your Focurite preamp, but it will go into the Apollo Twin’s ADAT input and it will show up on the channel strips – and you can use processing on those channels with no latency. And yes, the uad plug-ins are every bit as good as you’ve heard! -Andy Share Reply Quote

What Is ADAT? Everything You Need To Know – Production Expert

Mar 4, 2021The connection between the 4-710d and the Apollo Twin is simple, plug the ADAT Lightpipe cable into the ADAT Out 1-8 connection on the rear of the unit, see above. … the Apollo Twin can only use all 8 channels if working at sample rates of either 44.1 or 48Khz. At 88.2 and 96Khz it drops to 4 channels and at 192Khz 2 channels. Clocking …

What is ADAT and how does it work? – The Home Recordings

Apr 26, 2021Connect the ADAT Output of the AUDIO INTERFACE to the Optical/ADAT input of your external device using a Toslink cable. Set the Sample Rate (44.1kHz or 48kHz, 96kHZ, etc.). Set your devices’ clock settings so that all devices are receiving clock signal from a single master device. Route the signal in your DAW.

ADAT into Apollo Twin X : universalaudio – reddit.com

ADAT into Apollo Twin X. Close. Vote. Posted by 5 minutes ago. ADAT into Apollo Twin X. I bought a Clarett OctoPre that I assume will just need to be plugged into the S/PDIF input of the Twin X, and set the OctoPre to internal clock and the Twin X to ADAT clock? 0 comments. share. save. hide.

ADAT line inputs for Apollo Twin Duo? : universalaudio – reddit

Hi r/universalaudio!I’m totally new to the UAD stuff as I just got my very first apollo twin quad since last month, but I only started incorporating UAD plugins in my mixing workflow recently and have this problem where every time I put a UAD plugin on the signal chain, rather than latency it would make my tracks sound earlier, and if I use a delay plugin dialed in with the sample number shown …

Universal Audio Apollo Console Routing Explained | Sweetwater

Mar 12, 2021Follow the instructions below to learn how to Save and Load your routing settings. Save I/O preset Click Save. Name your preset. Click OK. Load I/O preset Click IO Preset. Choose your preset. Click Load. When you need help, Sweetwater has the answers!

Apollo Input Connections Explained – Universal Audio Support Home

Apr 14, 2022If using an Apollo Twin, Apollo Twin MkII, or Apollo 8p, first change the Digital Input to S/PDIF by going to Console > Settings > Hardware, clicking on your Apollo in the device list and selecting “S/PDIF” from the Digital Input menu: Selecting S/PDIF as the Digital Input in Console > Settings > Hardware

How To Use Your ADAT Input [Video] – Recording Revolution

I’ve written before on expanding your inputs with ADAT, and how it’s a simple way to get more channels of audio into your ADAT equipped interface. Today, however, I want to show you exactly how to hook the darn thing up and specifically in Pro Tools how to set things up to work flawlessly. In the video I’m using a Behringer ADA8000 into a …

9 Audio Interfaces with ADAT Connectivity! – The Home Recordings

May 18, 2021Even though it only has 2 inputs, each with a mic/line input on combi XLR/jack sockets, it can be expanded through the optical input which allows for an extra 8 channels of ADAT at 44.1kHZ or 48kHz, 4 channels of ADAT at 88.2kHz or 96kHZ, or 2 channels of S/PDIF between 44.1kHz and 96kHz. Channel one also has a ¼” instrument input.

PDF

Apollo Twin USB connects to the outputs and inputs of other audio gear, and performs analog-to-digital (A/D) and digital-to-analog (D/A) audio conversions on the gear’s signals. The digital audio signals are routed into and out of the host computer via the high-speed USB 3 protocol, which is carried on a single USB 3 SuperSpeed cable.

Expand Your Inputs With ADAT – Recording Revolution

Simple, clean, and affordable Many audio interfaces come with this connection on the back. It may be labeled ADAT or Optical in, but it’s all the same. Your total available I/O usually takes this connection into the equation so if you think you’re missing some of the advertised inputs this is probably where they are hiding. Expanding Your Horizons

Expanding Your Mobile UA Apollo Recording Rig Using Optical Preamps

What you need to do is open the UAD Console 2.0 Setting tab and in the Hardware section, select ADAT for your Clock Source and set the SAMPLE RATE to be the same as your external preamp. If you have an Apollo 8P, you’ll notice the EXT white light is lit up on the front panel, indicating your sync is connected externally to your preamp. 48kHz

Best Adat For Apollo Twin

Sep 2, 2021Best Adat For Apollo Twin. input audio interface headphonereview. apollo twin universal audio expanded pairing. One of the reasons I use Universal Audio Apollo Twin MK II and Apollo 8p recording interfaces on mobile sessions is their ability to quickly expand input channels. By utilizing the ADAT lightpipe connector on the back of each unit …

UAD Apollo Twin as DAC with stereo system?

The other is you might use ADAT instead of Toslink. ADAT over the same connectors and optical cable uses a different format. It can carry up to 8 channels. I don’t think the Apollo is set up to handle more than six channels, but you could send some channels from another device over ADAT for multiple channels.

10 Tips for UAD Apollo Users : Ask.Audio

4. Check Your Clock. Many Apollo users will be taking advantage of the ADAT optical inputs to use external preamps. When using a preamp with a digital output, be sure to set the Clock Source accordingly in the Console Settings > Interface > Clock Source drop-down window. Once you’re locked and loaded, the Ext Clock light on the front of the Apollo will turn green.

Best Adat For Apollo Twin

Sep 13, 2021The other is you might use ADAT instead of Toslink. ADAT over the same connectors and optical cable uses a different format. Do I need a “better” standalone DAC for the UAD Apollo Twin X General Audio Discussions. 1. Jan 28, 2021. P. Strange sound from speakers with Ncore amp Apollo Twin X.

UAD Apollo Twin interface – Fractal Audio Systems Forum

I so want to love the Apollo twin, but the lack of a coax input and the lack of midi and the fact it has so few inputs renders it an expensive waste of time IMHO. If you want 3 inputs then you need to add adat inputs. Running a three grand axe into an expensive soundcard via a $19 convertor from amazon would just annoy me.

Using the UAD Apollo Console with the Akai MPC and Hardware … – Altruwest

Sep 24, 2020The key to the flexibility with the UAD Apollo system lies with the Console application and it’s “flex routing” capabilities. My UAD Apollo Console Application Setup. My current configuration pairs the UAD Apollo Quad Firewire and the Antelope MP8D 8 Channel preamp connected via ADAT and clocked via word clock.

Apollo Headphone and Cue Outputs Setup | Sweetwater

Mar 12, 2021Cue 1, send a mono channel. Send signal via Cue 1 to the Apollo Twin headphones and a headphone amplifier connected to Apollo 8 Line Outputs 1-2. Select Cue 1 as the Source for Cue 1. Select the Apollo Twin Headphones (HP). Optional: Select an additional Mirrored Output (e.g. Line 1-2) to receive the signal.

Universal Audio Apollo Twin Audio Interface | Review, Setup, & Test

Fast forwarding to today (after using the Apollo Twin for a couple of weeks), I can safely say that it was well worth the investment … Optical Toslink input (to connect preamps or other sources with ADAT or SPDIF) Front Panel Connections. On the front of the interface, you’ll find the following connections: Hi-Z Instrument Input;

Apollo Audio Interface Basics & FAQ – Universal Audio

Yes. Apollo works just like any other UAD-2 PCIe, Satellite or SOLO Laptop card. One license of UAD-2 Powered plug-ins can run on up to 4 devices, but they all must be registered in the same account “group.” By adding Apollo to your group, you can take your plug-ins wherever you take Apollo, such as recording and mixing sessions in other …

Setting Up Apollo Interfaces w/ Logic Pro | Universal Audio

Setting Up Apollo Interfaces w/ Logic Pro. In this short video, UA’s Gannon Kashiwa demonstrates the basic setup procedure for Apollo Interfaces within Logic Pro. Topics covered include: Loading The Driver, Setting The I/O Buffer, Using The Console Recall Plug-In, and more.

Best Adat For Apollo Twin

Best Adat For Apollo Twin. input audio interface headphonereview. apollo twin universal audio expanded pairing. One of the reasons I use Universal Audio Apollo Twin MK II and Apollo 8p recording interfaces on mobile sessions is their ability to quickly expand input channels. By utilizing the ADAT lightpipe connector on the back of each unit …

UAD Apollo Twin Series vs Arrow (Side By Side Comparison)

2. UAD Apollo Twin MKII Duo/Quad Review. The Apollo Twin MKII is very similar to the Twin USB model. You get the Realtime Analog Classic Bundle, eight additional inputs using the ’ADAT Optical’ expansion, six output channels, stereo headphone outputs and line outputs 3 & 4. But there are also a few differences.

uad apollo twin mk2 adat- E START サーチ

Apollo Twin ADAT, What are YOU using? – Gearspace.com. 2017/01/13 … Im currently using the Universal Audio Apollo Twin which has ADAT as my … What’s up with no optical outs on this and on the twin mk2. – 2017/1/13 – 149k

uad apollo twin mk2 adat- E START サーチ

Apollo Twin Duo USB vs. Apogee Symphony Desktop … Universal Audio. Universal Audio … How to use ADAT & Aggregate Devices For More Inputs.

Roland Octa-Capture as 8 Channel Expansion with Apollo Twin?

If your Octa-capture had an ADAT output, then you could plugin that in to the apollo’s optical input, but the Octa-capture (AFAIK) has no such output. If you’re using WDM you can use more than device, but you need to ensure the wordclock’s are synchronised. The Octa-capture has an coax input, which could be used to slave to another device …