RE: How to remove O2 Sensors? Definitely use anti-seize. O2 sensors will sometimes seize in the bung and tear the threads out of the bung when you remove them.
They will nwed to je disconnected at the harness (just floolow the wires back, cant miss them, and then removed. Lightly coat threads with anti …
How do you remove an o2 sensor from a motorcycle?
One of the best tools to use here is a standard 7/8(2.2cm) box-end o2 sensor wrench which should be about the average o2 sensor socket size. Use a hammer to move the wrench. If you don’t have a wrench, you can use your flat-combination spanner. It is usually 22 mm.
What happens if you run without O2 sensors?
The only problem will be that your vehicle will run sluggishly or roughly, or it will stall. The default, limp-home fuel setting of an engine computer unit that receives no signal from the O2 sensor is an overly rich mixture.
Can you tune a Harley without O2 sensors?
You can run the bike without the o2 sensors, but it is better to run it with them. From what I was told once you have the afr set the sensors will keep it at those settings as conditions change.
Can an O2 sensor be bypassed?
Bypassing the oxygen sensor with a dummy can be done. Many people will do this to get the Check Engine Light to turn off when emissions aren’t right or to allow for more flexibility when tuning the engine.
Can I run without downstream O2 sensor?
Yes, you can drive a car without a downstream o2 sensor. This means that it can no longer monitor for proper emissions after this point and your engine will run a rich fuel mixture, so fuel economy will drop.
Can you run without an O2 sensor?
Driving with a faulty O2 sensor means the computer won’t be getting the correct reading of the mixture and hence it won’t be able to adjust the air-fuel mixture properly. But if your engine starts and runs, and can stay running, it’s drivable.
What will happen if you run something without an 02 sensor?
If an oxygen sensor fails, the engine computer won’t be able to correctly set the air-fuel ratio, which could result in lower fuel economy, higher emissions and damage to other components, such as an overheated catalytic converter.
What does the O2 sensor do on a motorcycle?
Yes, you can drive a car without a downstream o2 sensor. This means that it can no longer monitor for proper emissions after this point and your engine will run a rich fuel mixture, so fuel economy will drop.
What is an O2 sensor eliminator on a motorcycle?
The eliminator simulates the signal given from the O2 sensor under optimal A/F ratio conditions. This allows the bike to run under best performance conditions.
What kills a O2 sensor?
Small amounts of tetra-ethyl lead in the gasoline or over-the-counter fuel additives, which are not “oxygen sensor safe”, can also kill an oxygen sensor. Failures can occur instantaneously at the time the contaminant contacts the oxygen sensor, causing a dead sensor, or gradually over a period of time.
What does an O2 spacer do?
The spacer puts the O2 sensor out of the exhaust flow. This tricks the ECU into thinking that the cat is working when you don’t have one or have a high flow one.
How do you disconnect an O2 sensor on a motorcycle?
Should You Bypass Oxygen Sensors? Bypassing the oxygen sensor with a dummy can be done. Many people will do this to get the Check Engine Light to turn off when emissions aren’t right or to allow for more flexibility when tuning the engine.
More Answers On how to remove o2 sensor on harley davidson
Removing O2 sensors from the pipes…? | Harley Davidson Forums
webco2. Banned. Joined Jul 30, 2012. 43 Posts. #3 · May 28, 2016. nipplesurfer said: the wires are not free floating. They will nwed to je disconnected at the harness (just floolow the wires back, cant miss them, and then removed. Lightly coat threads with nickel anti seize before reinstalling.
Running Harley Without O2 Sensor: A Guide
Mar 21, 2022According to the email answered by Vance and Hines in 2015, running Harley without O2 sensors will not harm the engine. However, it will lead to increased fuel consumption at high altitudes and comparatively low fuel consumption at low altitudes. Similarly, removing O2 sensors will cause more emissions of gases making the system less eco …
Disconnect The 02 Sensors | Harley Davidson Forums
Since the output is low in current, the signal has to go into a very high impedance amplifier (part of the ECM). If you unplug the input to this amplifier (disconnect the signal source which in this case is the o2 sensor) the amplifier can “latch up” and peg. Depending on the amplifier, it may latch Up or Latch down (peg up or peg down).
Harley O2 sensors | Fix My Hog
The only problem is that my bike doesn’t seem to have hot Harley O2 sensors. I watched your video on installing V & H pipes. The only problem is that my bike doesn’t seem to have hot Harley O2 sensors. …
O2 Sensor delete : Harley – reddit
The o2 sensors help adjust the fuel going into the intake based on the amount of air coming in. And something people do not realize barometric pressure, how humid or dry the air is, how clean or dirty your filter is etc. Esentially what I am saying is that the air coming into the motor has a lot of variables. That the o2 sensor adjusts for.
O2 Sensor Removal Trick? | Harley Davidson V-Rod Forum
Be sure to clean the wax out of the threads and to check that the 02 sensors threeads have anti-sieze on them… Fast Eddie said: Z-. Easy fix–heat up the sensor and bung with a torch, then touch any wax candle to it. The wax will melt and chase the threads, then the sensor will twist right out. Works like a charm.
O2 (Lambda) sensor removal and tweaks | BoosterPlug FAQ
The simple and cheap O2 (Lambda) sensor eliminators are usually just disconnecting the O2 sensor signal to the ECU, and they only contain a smal resistor for the heating circuit to avoid a fault warning in the dashboard. So they work similar to the O2 sensor removal described above, and they are not doing your bike any good.
how to take out front O2 Sensor??? – V-Twin Forum
Remove your old exhaust with the O2 sensors still installed and the pigtails hanging. Once the exhaust is removed, set aside and spray WD-40 or PB Blaster on the exposed threads and allow to soak. Later, remove the sensors from old exhaust.
Special tool for removing O2 sensor? | V-Twin Forum
Special tool for removing O2 sensor? Jump to Latest Follow 1 – 11 of 11 Posts. M. MikeyT · Premium Member. Joined Sep 11, 2005 · 107 Posts . Discussion Starter · #1 · Nov 17 … Discussion on V-Twin Harley Davidson motorcycles including Dyna, Electra Glide, Softail, Sportster, and more. Full Forum Listing.
O2 Sensor removal – Road Glide
Out here, they loan out tools for free and I borrowed an Oxygen Sensor removal tool from them. Worked great on my 2009 Road Glide. Tool is exactly as akjeff described, but not something I need to keep in the toolbox for regular use. Todd. 2009 Road Glide – Red Hot Sunglo w ABS.
O2 Sensor | Harley Davidson Forums
7,198. 0. 34. Simple answer. O2 sensors did not make the scene until after 2000 (somewhere around 2006 for the most part). Your ECM selects an A/F ratio by look up tables only. There is no exhaust feedback sent to the ECM for correction. Your an “Open Loop” system. Hoople, Mar 7, 2011.
trouble unplugging O2 sensor – V-Twin Forum
145 Posts. #2 · Dec 20, 2008. Until you see how the first one goes, use a “bright” flashlight and a small screwdriver. The harness side of the connector is male and the O2 sensor side is female. Lift the locking clip and separate the male/female connector halves. Of course it’s best to pull only on the connector halves vs. the wires themselves.
DIY O2 Eliminator – nightrider.com
Do-It-Yourself O2 eliminator: The use of O2 eliminators has become fairly common on the 2007 Harley-Davidson engines with aftermarket tuning devices. When using an O2 eliminators supplied by PowerCommander, TFI, etc., the engine idles at a very rich 12.0:1 AFR during warm-up and forces the engine to run in open loop ECM operation all the time.
M18 Oxygen Sensor Installation Tool – Harley-Davidson USA
M18 Oxygen Sensor Installation Tool. 4 interest-free payments of $103.25 with Klarna. This special tool is designed to make the necessary headpipe modifications for installation of the Screamin’ Eagle ® Smart Tune PRO Automatic Tuning Module’s wide band oxygen sensors.
M18 to M12 O2 Sensor Thread Adapters – Harley-Davidson Canada
Financing Offer available only on Used Harley-Davidson ® motorcycle models financed through Harley-Davidson Financial Services Canada (HDFSC) and is subject to credit approval. Not all applicants will qualify. 4.99% Rate offer is available only to high credit tier customers at HDFSC who also purchase the Harley-Davidson ® Extended Service Plan and only for up to a 60 month term.
Harley-Davidson
Refer to the Screamin’ Eagle Pro catalog or contact a Harley-Davidson dealer for Screamin Eagle Pro Street Tuner details. View interactive image. 1: Wideband O2 sensor selection … A professional welding or metal fabrication shop is highly recommended for removing and installing the oxygen sensor bung. Remove or plug both stock oxygen sensor …
Harley-Davidson Oxygen Sensors & Accessories – Dennis Kirk
Shop the best selection of Harley-Davidson Oxygen Sensors & Accessories at Dennis Kirk for the lowest prices. FREE SHIPPING on orders over $89 – We Ship Today! … Feuling Parts 18mm to 12mm Oxygen Sensor Bung Adapters – 9927 Part #: 4409132 Mfg Part #: 9927 $ 74.65. Cycle Pro O2 Sensor – 14279 Part #: 4410777 Mfg Part #: 14279 $ 19.99 (44) …
Harley Davidson Softail Exhaust Review and How to Install New Pipes
Flip the foot rest up and remove the two bolts holding it in place. You will need a 3/16 Allen and a 7/16 socket. Figure 4. Remove the additional bracket bolts when replacing the entire exhaust end-to-end. Figure 5. Remove the crossover pipe clamp with a 5/8″ socket on both ends. Figure 6.
Cycle Pro Front O2 Oxygen Sensor for 2009 Harley Davidson VRSCDX Night …
Cycle Pro Rear O2 Oxygen Sensor for 2007-2009 Harley Davidson FXDL Dyna Low ld. New New New. $80.57. Free shipping Free shipping Free shipping. Cycle Pro Rear O2 Oxygen Sensor for 2007-2009 Harley Davidson FLHR Road King yp. New New New. $80.46. Free shipping Free shipping Free shipping.
O2 Sensor Removal Trick? | Harley Davidson V-Rod Forum
Be sure to clean the wax out of the threads and to check that the 02 sensors threeads have anti-sieze on them… Fast Eddie said: Z-. Easy fix–heat up the sensor and bung with a torch, then touch any wax candle to it. The wax will melt and chase the threads, then the sensor will twist right out. Works like a charm.
O2 sensor remove? | Harley Davidson V-Rod Forum
I just installed my new to me used set of Fitzgerald Cutthroat exhaust on my 2009 Muscle. The holes on the pipes for the O2 sensors are capped. Should I remove the caps and connect my sensors to the pipes or just cut or unplug them. I will be installing a PCV also and I’m not sure if the O2 sensors will be required for it to work correctly. Save.
O2 Sensor delete : Harley – reddit
The o2 sensors help adjust the fuel going into the intake based on the amount of air coming in. And something people do not realize barometric pressure, how humid or dry the air is, how clean or dirty your filter is etc. Esentially what I am saying is that the air coming into the motor has a lot of variables. That the o2 sensor adjusts for.
disconnecting 02 sensors – V-Twin Forum
Joined Feb 19, 2006. 5,582 Posts. #5 · Jun 21, 2007. Ok, first off you can disable the 02 sensors with the sert software, provided you have a tune with very accurate ve numbers, if you remove the 02 sensors however, you will throw a CEL light, unless, you run with 02 eliminators (1meg resistors) plugged into the harness, On the 06 dyna’s with …
Special tool for removing O2 sensor? | V-Twin Forum
Special tool for removing O2 sensor? Jump to Latest Follow 1 – 11 of 11 Posts. M. MikeyT · Premium Member. Joined Sep 11, 2005 · 107 Posts . Discussion Starter · #1 · Nov 17 … Discussion on V-Twin Harley Davidson motorcycles including Dyna, Electra Glide, Softail, Sportster, and more. Full Forum Listing.
O2 (Lambda) sensor removal and tweaks | BoosterPlug FAQ
The simple and cheap O2 (Lambda) sensor eliminators are usually just disconnecting the O2 sensor signal to the ECU, and they only contain a smal resistor for the heating circuit to avoid a fault warning in the dashboard. So they work similar to the O2 sensor removal described above, and they are not doing your bike any good.
Harley-Davidson Motorcycle Oxygen (O2) Sensor Wrench
Harley-Davidson Motorcycle Oxygen (O2) Sensor Wrench. JIMS No. 784 Oxygen Sensor Wrench is a must have new tool for remoing and installing H-D’s new 4 wire heated oxygen sensor on 2010 FLH and Touring Model motorcycles. The new fragile O2 sensor must be torqued to a sensitive 14 ft-lbs, lending to the design of this tool to be used with a 3/8 …
How to Bypass Oxygen/O2 Sensor, A Step by Step Guide
Step 6. Carefully, unhinge the electrical wire that’s embedded within the sensor. Squeeze to release and pull it out gently from the oxygen/o2 sensor’s housing. Step 7. You will now need to remove the sensor. In order to do so, rotate the oxygen sensor counterclockwise. Utilize a removal tool at this point. Step 8.
How to Remove O2 Sensor Without Socket – Rx Mechanic
One of the best tools to use here is a standard 7/8 (2.2cm) box-end o2 sensor wrench which should be about the average o2 sensor socket size. Use a hammer to move the wrench. If you don’t have a wrench, you can use your flat-combination spanner. It is usually 22 mm. Since you added the penetrating oil a while ago, the sensor should be a lot …
How do you Replace an engine temp sensor on a Harley ultra classic …
You will need a 3/4″ deepwell socket to remove it. I am sure there is a special sensor tool Harley sells to remove it, but I modified a 3/4″ spark plug socket with a 7/8″ hex on top by cutting 1/4 …
Did a 2005 harley have a oxygen sensor – Fixya
SOURCE: oxygen sensor. They are all located on you exhaust system. Start from you exhaust manifold and follow the pipes down to the tail pipes . You will see the sensors (4) they are screwed into exhaust pipes and they have wire connections on them (Kinda Looks Like a spark Plug) they wires are unusually colored in white black and grey.
Resource
https://www.harley-davidsonforums.com/threads/removing-o2-sensors-from-the-pipes.295050/
https://www.strictlymotorcycles.com/running-harley-without-o2-sensor-a-guide/
https://www.hdtimeline.com/threads/disconnect-the-02-sensors.28948/
https://www.fixmyhog.com/post/harley-o2-sensors/
https://www.reddit.com/r/Harley/comments/5v5vm4/o2_sensor_delete/
https://www.1130cc.com/threads/o2-sensor-removal-trick.116832/
https://www.boosterplug.com/shop/cms-o2_lambda_sensor.html
https://www.v-twinforum.com/threads/how-to-take-out-front-o2-sensor.142579/
https://www.v-twinforum.com/threads/special-tool-for-removing-o2-sensor.93093/
https://www.roadglide.org/threads/o2-sensor-removal.2194/
https://www.hdtimeline.com/threads/o2-sensor.36754/
https://www.v-twinforum.com/threads/trouble-unplugging-o2-sensor.139444/
http://www.nightrider.com/biketech/hd2007HD_nbo2_eliminator.htm
https://www.harley-davidson.com/us/en/shop/m18-oxygen-sensor-installation-tool/p/14900105
https://www.harley-davidson.com/ca/en/shop/M18-to-M12-O2-Sensor-Thread-Adapters/p/65700025
https://serviceinfo.harley-davidson.com/sip/service/document/1488216900935899409?locale=en_US
https://www.denniskirk.com/harley-davidson/oxygen-sensors-and-accessories
https://www.hdforums.com/how-tos/a/harley-davidson-softail-exhaust-review-and-how-to-install-new-pipes-413180
https://www.ebay.com/itm/234549916013
https://www.1130cc.com/threads/o2-sensor-removal-trick.116832/
https://www.1130cc.com/threads/o2-sensor-remove.438219/
https://www.reddit.com/r/Harley/comments/5v5vm4/o2_sensor_delete/
https://www.v-twinforum.com/threads/disconnecting-02-sensors.107768/
https://www.v-twinforum.com/threads/special-tool-for-removing-o2-sensor.93093/
https://www.boosterplug.com/shop/cms-o2_lambda_sensor.html
https://www.toolsource.com/vtwin-motorcycle-tools-c-468_877/harleydavidson-motorcycle-oxygen-o2-sensor-wrench-p-108914.html
https://curateview.com/bypass-oxygen-sensors/
https://rxmechanic.com/how-to-remove-o2-sensor-without-socket/
https://www.answers.com/Q/How_do_you_Replace_an_engine_temp_sensor_on_a_Harley_ultra_classic
https://www.fixya.com/motorcycles/t17352609-did_2005_harley_oxygen_sensor