In all, that just about neatly rounds up our look at the 283 Chevy engine and the awe-inspiring nature of its small-block V8s as a whole. For the 283, in particular, it led to the continued evolution and rapid growth of small-block motors across all of Chevrolet, and its GM stablemates.
Moriarity and kiwijeff like this. 57 Chevy restored is one of the hottest items on the market these days and they just happen to require a 283. 283 in any condition is worth a lot to the serious collector. Hey RUSTEE, Newyorker is right, some 283s are junk, check bottom of bores. ones that have taper at that point are good for Stroking.
The 283 was an improved design over the Chevy 265 in that the bottom end crankshaft and pistons were much more reliable because of the increased flow of oil supply that was engineered into the motor.
Is a Chevy 283 a good motor?
Even after the 327’s debut, the 283 made such a good base engine that it soldiered on through 1967. With its short 3-inch stroke, a 283 can rev as if there’s no tomorrow, but the small bore restricts adding really large valves and, hence, ultimate breathing potential.
What year did the 283 Chevy engine come out?
283 Turbo-Fire: Featuring a larger bore than the 265, the 283 was first offered in 1957 and came with a choice of carburetion or mechanical fuel injection. The most powerful engine of this group, the fuel-injected Super Ram-Jet was the first to achieve the coveted one horsepower-per-cubic-inch threshold.
What was the last year Chevy made the 283 engine?
IN 1967 IT WAS REPLACED BY 307 IN 1968 .
How much horsepower did the Chevy 283 have?
Models equipped with the Rochester Ram-Jet fuel injection system made 250 horsepower. The most powerful engine of the lot was the 283-hp fuel-injected Super Ram-Jet with its 10.5:1 compression ratio, helping it achieve the coveted one horsepower per cubic inch status.
Is the 283 a good engine?
Even after the 327’s debut, the 283 made such a good base engine that it soldiered on through 1967. With its short 3-inch stroke, a 283 can rev as if there’s no tomorrow, but the small bore restricts adding really large valves and, hence, ultimate breathing potential.
What vehicle has a 283 engine?
Vehicles Using the 283ci Engine The 283 cubic-inch V8, in one of its many forms, powered virtually every Chevrolet passenger car throughout the late 1950s and early 1960s. Some of the most notable examples include the Bel Air, Impala, Malibu and Chevelle.
Is a 283 a good engine?
Even after the 327’s debut, the 283 made such a good base engine that it soldiered on through 1967. With its short 3-inch stroke, a 283 can rev as if there’s no tomorrow, but the small bore restricts adding really large valves and, hence, ultimate breathing potential.
How much HP can you get out of a 283 Chevy?
On the surface of it, one would be hard pressed to believe that a Stock 283 Chevy, with an actual displacement of 293 cubes, breathing through 1.72-inch intake valves, with lift restricted to a meager 0.399 inch through a stock-style valve train would pull hard to upwards of 8,000 rpm and deliver power approaching 1.3 …
How much horsepower does a 1965 283 have?
Vehicles Using the 283ci Engine The 283 cubic-inch V8, in one of its many forms, powered virtually every Chevrolet passenger car throughout the late 1950s and early 1960s. Some of the most notable examples include the Bel Air, Impala, Malibu and Chevelle.
How much horsepower does a 1957 283 have?
The 1957 “Fuelie” 283 came in two varieties: With hydraulic lifters and 9.5:1 compression, it produced 250 horsepower; with solid lifters and 10.5:1 compression, it made 283 horsepower.
What year did the Chevy 283 engine come out?
By 1957 it had grown to 283 cu in (4.6 L). Fitted with the optional Rochester mechanical fuel injection (FI), it was one of the first production engines to make 1 hp (0.7 kW) per 1 cu in (16 cm3). The 283 was adopted by other Chevrolets, replacing the 265 V8s.
What engines were available in 1961 Corvette?
Engine choices were basically carryovers. There were still five versions of Chevy’s renowned 283-cubic-inch small-block V-8: 230, 245, 270, 275, and 315 bhp, the last two being fuel injected. The three-speed manual remained the standard gearbox but was now offered with a wider choice of axle ratios.
More Answers On how much is a chevy 283 engine worth
283 Chevy Engines…are they worth very much nowadays??
I had a friend come up to me about quitting time at work and asked me if I would be interested in a total of (3)-283 Chevy Engine blocks. I asked how much and I believe I could get them all for around $75.00. Are they worth saving as compared to say a 350?
How Much Is A Chevy 283 Engine Worth – Chevy Engine
Grab the best deals on how much is a chevy 283 engine worth with a 5 year warranty and Free Shipping offered only at chevyengineforsale.com. Chevrolet is the colloquial name for this popular brand of automobile.
Viewing a thread – Does an old 283 Chevy engine have any value?
Posted 5/7/2017 10:49 (#6004960 – in reply to #6004494) Subject: RE: Does an old 283 Chevy engine have any value? High Springs, Florida If memory serves me correctly, a 283 crank in a 327 block would make a 302, which was found in some Z28 Camaro’s. 1969 or thereabouts.
Whats a 283 worth? | Team Chevelle
M 1958 283 manual transmission 160hp 2bbl carb truck So, its not for any ’rare’ car. Its worth what ever someone is willing to pay. Probably $150 -$250 depending on condition, how much of it goes with the sale and if someone needs an engine to get them by. J jaf6738 Registered Joined Nov 20, 2002 1,087 Posts #7 · May 30, 2009
Chevy 283 / 280 HP High Performance Balanced Crate Engine
Engine comes with a one year, unlimited mileage written warranty. If you have any questions, please call us at Five Star Engine and Cylinder Exchange (623) 939-0345 or call toll-free at (888) 700-3483, business hours 8am – 5pm M-F MST. Or you can contact us through email at: fivestarengines@yahoo.com
used 283 chevy engine for sale: Search Result – eBay
1962-63 Chevrolet 283 v8 engine, Incuded is a auto trans turbo 350.local pickup Pre-Owned $595.00 or Best Offer Free local pickup 14 watchers Sponsored Chevy 283 Engine Pre-Owned $1,200.00 Buy It Now Free local pickup Sponsored Engine Cam Camshaft for LS Sloppy Stage 2 5.3L 6.0L 1997-2007 3-Bolt E1840P 286° (Fits: Chevrolet) Brand New $98.55
Chevy 283 V8 Engine : Engine Facts.com
The Chevy 283 V8 was introduced in 1957 and used up through 1961. GM developed the engine by increasing the bore of the Chevy 265 V8 which was first produced in 1955. The 283 was manufactured with several different carburetor setups such as a single 2 barrel, a 4 barrel, a 2 x 4 barrel setup and an impressive fuel injected model.
How much should a 283 cost? – The H.A.M.B.
If it runs good, doesn’t smoke or leak excessively, and appears to be something you can drop in and run as is, I’d pay $300-$400 for it, providing a 283 is what you want. Since it’s coming out of a ’57, check the code stamping. If it’s the original block, it’s worth more than that to a restorer. HEATHEN, Feb 2, 2006 SHARE POST #9 stan292 Member
283 worth rebuilding? – Chevy Nova Forum
I rebuilt a 283 a couple years ago and it ran me $1,200 for the work done to it. It has decent power for cruising around town and sounds good but is no performance engine by any means. Probably be in the 190-225 HP in stock form. If its never been rebuilt it will likely need the full works at the machine shop.
How much should I pay for machine shop for a 283? – Team Chevelle
3,926 Posts. #5 · Aug 3, 2012. Only show this user. In central California, my machine guys machineing prices for the bottom end of the engine should be around $300-$400, crank about $150 to turn assuming yours is usable, and the master kit should be around $600. This doesn’t include if he is going to do the assembly.
Chevrolet 283 Engine Information – It Still Runs
The 16-valve 283 featured a 3.87-inch bore and 3-inch stroke within a 283-cubic-inch displacement (4.6 liters). It featured a single overhead camshaft and overhead valves. It generated the expected 283 horsepower at 6,200 rpm, but also a healthy 290 foot-pounds, the twisting force generated inside the engine to give the vehicle its get-up-and-go.
283 Chevy Engine 🏎️ Does It Have Great Swap Potential?
Dec 20, 2021Meanwhile, the 283 is a meatier 4.6-liters. The third and last of the 3.876-inch bore family of first-generation small-blocks was the 307. With its 5.0-liter displacement, the 3.876-inch engines soldiered on in production until 1973.
283-Inch Small-Block Chevy- Car Craft Magazine – MotorTrend
With its short 3-inch stroke, a 283 can rev as if there’s no tomorrow, but the small bore restricts adding really large valves and, hence, ultimate breathing potential. Except for the Vette…
283 engine thoughts – Chevy Message Forum – Restoration and Repair Help
I have a 1963 Chevrolet Impala from the numbers the guys on here says its original most likely 283. What is the thoughts from the guys like me that enjoy these as much I do. Is the 283 looked down upon because there were better options out there the 327 etc. I have a 2 dr now but years back had 4 door, few said be better if it was 2.
283 Chevy Engine Cars for sale – SmartMotorGuide.com
1-15 of 640. Alert for new Listings. Sort By. 1957 Chevrolet Bel Air/150/210 Convertible – 283-270HP Dual Quad 57 CHEVY BEL AIR CONVERTIBLE 283-270HP DUAL QUAD – 3 SPD. FRAME-OFF RESTORATION! $145,000. Garfield, New Jersey.
Ask Away! with Jeff Smith: Best Performance Upgrades for a 283 Chevy …
Every point of compression is generally accepted to be worth about 3-4 percent power. … There’s not really much to tell with the 1962 283 engines. I don’tn have access to any records for marine engines. … I had a 283 engine in a 57 Chevy duntov cam shaved heads with a Holley 4-barrel in a Muncie 4-speed it was a great car this is really …
Chevy 283-cid V-8 Engine | HowStuffWorks
Chevy 283-cid V-8 Engine. The Turbo-Fire V-8 was bored out to 283 cid for 1957, would be a Chevy performance mainstay into the ’70s. The great small-block Chevy V-8 reached its second important development plateau in 1957. While the 265 was retained as the “base” engine this model year, the big news was the new 283-cid enlargement, achieved by …
Complete 327 motor…what’s it worth? – Chevy Message Forum …
Based on that information, it is EXTREMELY PROBABLE that it is a 300hp 327. Also, if it is a virgin engine, without question, it has 461X heads (the more desireable ones to have!!!). A $500 offer is a good place to start —————– BUT, if it were me, for sure, I’d be rebuilding it just for peace of mind.
Bigger Bores: To get to 283 cubic inches in ’57, Chevrolet punched out the 265 version’s cylinder bores from 3.75 inches to 3.875. This helped bring the stated horsepower up to 185 horsepower (from 162) for the single carburetor version. Because of thicker cylinder walls, good 283 blocks from 1957 can be bored as much as 0.120 over. The
What Is A Real Completely Rebuilt DZ 302 Worth? – Chevy Hardcore
E19 date code – fist week of May ’69 build date. V0507DZ stamp plate. A quick search on eBay helped us find plenty of 302’s for sale, but this one intrigued us and might help us solve the answer to our question. This DZ302 is currently listed for sale at just under $11,000. So is this particular engine worth that much?
What is a 1969 z28 Camaro worth? – bie.curwensvillealliance.org
Then, how much is a 1969 Chevy Camaro worth? It really depends on the car. … While the engine’s advertised output was 290 horsepower, it actually produced upwards of 400 horsepower in the real world. How much did a 1969 Camaro SS cost new? Base price for a 1969 Camaro was approximately $3600-3800. The top-of-the-line ZL1 sold for an amazing …
How much is a 2007 Chevrolet Cobalt worth?
2 days agoHow much is a Chevy Cobalt 2008 worth? The value of a used 2008 Chevrolet Cobalt ranges from $331 to $2,676, based on vehicle condition, mileage, and options. 27 Related Question Answers Found … The 2007 Chevy Cobalt comes with three engine options. The base-model LS, …
Value of a complete 409 engine | 348 and 409 Engines
Tom Kochtanek. It’s worth more than that in parts . Assuming that a truck block with standard bore (possibly needing to be bored) can go for $2000, then 333 heads are worth $200, oil pan $250-$300, crank around $300 and timing chain cover $50, it can add up .
Chevrolet Questions – whats my 1955 265 V8 engine worth – CarGurus
24 Answers. they are a special motor 55-57 265 v8 will not except side motor mount. they are not worth much,only to restorers you will be lucky to get 500.00 if it is all there. the four barrel carburetor and the generator with power asset pump are the items worth any money. 11 people found this helpful.
Viewing a thread – Does an old 283 Chevy engine have any value?
Posted 5/7/2017 10:49 (#6004960 – in reply to #6004494) Subject: RE: Does an old 283 Chevy engine have any value? High Springs, Florida If memory serves me correctly, a 283 crank in a 327 block would make a 302, which was found in some Z28 Camaro’s. 1969 or thereabouts.
283-Inch Small-Block Chevy- Car Craft Magazine – MotorTrend
With its short 3-inch stroke, a 283 can rev as if there’s no tomorrow, but the small bore restricts adding really large valves and, hence, ultimate breathing potential. Except for the Vette 283 …
How Much Horsepower Did a 283 Chevy Engine Have?
By Staff Writer Last Updated April 09, 2020. The Cheverolet 283 small-block engine was first produced in 1957, generating between 185 and 283 HP, and maxed out at 315 HP in 1961. This engine became famous as the basis for larger block engines. The 283 small-block engine was popular, because it was one of the first engines to produce 1 HP/ cubic …
283 engine thoughts – Chevy Message Forum – Restoration and Repair Help
I have a 1963 Chevrolet Impala from the numbers the guys on here says its original most likely 283. What is the thoughts from the guys like me that enjoy these as much I do. Is the 283 looked down upon because there were better options out there the 327 etc. I have a 2 dr now but years back had 4 door, few said be better if it was 2.
Bigger Bores: To get to 283 cubic inches in ’57, Chevrolet punched out the 265 version’s cylinder bores from 3.75 inches to 3.875. This helped bring the stated horsepower up to 185 horsepower (from 162) for the single carburetor version. Because of thicker cylinder walls, good 283 blocks from 1957 can be bored as much as 0.120 over. The
1964 Chevrolet Chevy II Nova SS Sport Coupe 283 V-8 Turbo-Fire 4-speed …
All specifications, performance and fuel economy data of Chevrolet Chevy II Nova SS Sport Coupe 283 V-8 Turbo-Fire 4-speed (145.5 kW / 198 PS / 195 hp), edition of the year 1964 since October 1963 for North America U.S., including acceleration times 0-60 mph, 0-100 mph, 0-100 km/h, 0-200 km/h, quarter mile time, top speed, mileage and fuel economy, power-to-weight ratio, dimensions, drag …
Resource
https://www.jalopyjournal.com/forum/threads/283-chevy-engines-are-they-worth-very-much-nowadays.284124/
https://www.chevyengineforsale.com/how-much-is-a-chevy-283-engine-worth/
https://talk.newagtalk.com/forums/thread-view.asp?tid=705426&DisplayType=flat
https://www.chevelles.com/threads/whats-a-283-worth.275672/
https://www.fivestarengines.com/shop/chevy-283-280-hp-high-performance-balanced-crate-engine/
https://www.ebay.com/sch/i.html?_nkw=used+283+chevy+engine&_sop=12&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5336728181&customid=&toolid=10001
https://www.enginefacts.com/chevrolet283/
https://www.jalopyjournal.com/forum/threads/how-much-should-a-283-cost.91588/
https://www.stevesnovasite.com/threads/283-worth-rebuilding.328897/
https://www.chevelles.com/threads/how-much-should-i-pay-for-machine-shop-for-a-283.389131/
https://itstillruns.com/chevrolet-283-engine-information-6549251.html
https://www.motorverso.com/283-chevy-engine/
https://www.motortrend.com/how-to/inch-small-block-chevy/
https://chevytalk.org/fusionbb/showtopic.php?tid/282848/
https://www.smartmotorguide.com/cars-for-sale/283-chevy-engine
https://www.onallcylinders.com/2018/07/06/ask-away-jeff-smith-best-performance-upgrades-283-chevy-small-block-engine/
https://auto.howstuffworks.com/chevy-283-cid-v-8-engine.htm
https://chevytalk.org/fusionbb/showtopic.php?tid/238039/
http://horsepowermonster.com/wp-content/uploads/2009/02/closer-look-283-teardown.pdf
https://www.chevyhardcore.com/news/what-is-a-real-completely-rebuilt-dz-302-worth/
http://bie.curwensvillealliance.org/what-is-a-1969-z28-camaro-worth
http://rg.yoga-power.com/how-much-is-a-2007-chevrolet-cobalt-worth
http://www.348-409.com/forum/threads/value-of-a-complete-409-engine.42343/
https://www.cargurus.com/Cars/Discussion-m1_ds515896
https://talk.newagtalk.com/forums/thread-view.asp?tid=705426&DisplayType=flat
https://www.motortrend.com/how-to/inch-small-block-chevy/
https://www.reference.com/world-view/much-horsepower-did-283-chevy-engine-7f8369ed13dd8632
https://chevytalk.org/fusionbb/showtopic.php?tid/282848/
http://horsepowermonster.com/wp-content/uploads/2009/02/closer-look-283-teardown.pdf
https://www.automobile-catalog.com/car/1964/422915/chevrolet_chevy_ii_nova_ss_sport_coupe_283_v-8_turbo-fire_4-speed.html