Having several return vents (ideally one in every room, but even two or three is better than just one) creates consistent air pressure. If you have one return vent, your home is fine. Keep the doors to each room open so air can properly circulate.
They would not count the electric heat installed in the room. My advice is to go for it. It took less than one day to install three vents and run the ductwork from the furnace in the basement through the first floor to the second floor.
To answer your question, no, you normally cannot supply too much return air. If installed in a certain fashion, with bedroom doors closed, it is possible to put a single room or two under negative pressure but that won’t affect the amount of heat entering the room substantially.
Having several return vents (ideally one in every room, but even two or three is better than just one) creates consistent air pressure. If you have one return vent, your home is fine. Keep the doors to each room open so air can properly circulate.
Can you have 2 return air vents?
Having several return vents (ideally one in every room, but even two or three is better than just one) creates consistent air pressure. If you have one return vent, your home is fine. Keep the doors to each room open so air can properly circulate.
Can I add another vent to existing ductwork?
To answer your question, no, you normally cannot supply too much return air. If installed in a certain fashion, with bedroom doors closed, it is possible to put a single room or two under negative pressure but that won’t affect the amount of heat entering the room substantially.
Can you have too many return ducts?
If there is not enough return air available, your HVAC system will not heat or cool properly. They must be properly sized — Return air ducts must be large enough to carry a sufficient amount of expended air back to your furnace, air conditioner, or heat pump.
Do I need 2 air returns?
Does Every Room Need Air Return Grilles? While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. The most important place to have these would be the bedroom.
Can I add another air return?
A second return duct can lower static pressure if the airflow bottleneck is on the return side. If the static is on the supply side, adding a second return will do nothing. So it’s usually a good idea. Get in touch with the trusted team at Greiner to learn the best way to install this in Your home.
How many cold air returns do you need?
How many cold air returns do I need? Ideally you want a cold air return register in every major room in your home. This would not include bathrooms and closets, but bedrooms, living rooms, etc. Older homes might only have just one or two on each floor.
Why do I have two air returns?
Having two air return vents allows you to seasonally control which air is returning to the HVAC system. In older homes, this may not be an option. The theory is that in the Summer cooling season, you want to be circulating warmer air back through the HVAC system to be cooled.
Can I add an air vent to existing ductwork?
Yes, it’s quite possible to add a vent into the existing ductwork. But, you’ll need to check the compatibility of the AC and heater. After this, locate spots and mark them. Then, cut the piece and add the vent cover after ensuring the right fit.
How do you add to existing ductwork?
Splitting a duct will reduce the efficiency of conditioning that space. You will need to know if the HVAC system has enough CFM Flow for the addition to begin with. Ideally it would be best to run a line direct from the main box coming from the HVAC unit.
Can a house have too many return air vents?
Having several return vents (ideally one in every room, but even two or three is better than just one) creates consistent air pressure. If you have one return vent, your home is fine. Keep the doors to each room open so air can properly circulate.
Why does my house have so many return vents?
Your return vents are an indispensable part of the HVAC system in your house. They function to keep your interior pressurized as well as the interior air clean as they feed air to the air handler.
How many return vents do you need in a house?
Instead, there should be at least one return vent in every room, with two or three being ideal. If your house has only one return vent, this is not a problem — make sure to keep the doors open in every room so the air can circulate properly.
Why does my house have 2 air return vents?
Having two air return vents allows you to seasonally control which air is returning to the HVAC system. In older homes, this may not be an option. The theory is that in the Summer cooling season, you want to be circulating warmer air back through the HVAC system to be cooled.
How many air returns are needed?
Your Home May Not Have Sufficient Return Vents Having a number of return vents (preferably one in every room, but also 2 or three is far better than just one) creates regular air pressure. If you have one return vent, your house is great. Maintain the doors to every room open so air can properly flow.
Can you have too many cold air returns?
To answer your question, no, you normally cannot supply too much return air. If installed in a certain fashion, with bedroom doors closed, it is possible to put a single room or two under negative pressure but that won’t affect the amount of heat entering the room substantially.
What happens if there is not enough return air?
If there is not enough return air available, your HVAC system will not heat or cool properly. They must be properly sized — Return air ducts must be large enough to carry a sufficient amount of expended air back to your furnace, air conditioner, or heat pump.
More Answers On Can I Add Another Return Air Duct
Adding a Second Return Is Almost Always a Good Idea
Adding a second return duct will fix all of these problems. In our pilot project, we had an 8″ in the master bedroom and a 14″ in the main house- and that’s only for a 1.5 ton system! A second return duct can lower static pressure if the airflow bottleneck is on the return side. If the static is on the supply side, adding a second return will …
How to Install a Return Air Duct | DoItYourself.com
Step 4 – Add Return Air Duct to Basement. You can add an air return to the basement (or any other space) by tapping into the ductwork above it. This helps pull cold air out of the basement and provide warm air into the home. Again you’ll need to start by identifying the correct duct to tap into. Remove any ceiling materials, if applicable.
Learn How To Install Return Air Duct In Your Home – The Duct Kings
A return duct is the part of the system that carries the air back to the furnace or air handler where it will then be circulated back out through the supply vents. That’s right, your heating and air system is nothing more than a big circulation unit. Without the return duct, the air in the home would not be able to properly circulate.
Ramifications of adding a second HVAC air return (in parallel)?
The existing HVAC return air filter is in standard(ish) drywall ’feed’ ducting to the HVAC blower unit. In many new homes this return is located in a central hallway, or other central area, of the house and there is plenty of ’blank’ drywall in this drywall ’feed’ ducting to install a second ’Return Air Filter Grille for 1″ Filter’ assembly [1].
Can I add 4 more return ducts to an existing forced air system?
I recently installed an Aprilaire 5000 EAC and want to know if I can add return ducts to each upstairs bedroom for better air cleaning. I have a 3 level home (basement, 1st and 2nd levels) that was built in 1997 (3400 Sq ft). The unit is a Carrier 2-1/2 ton heating and cooling system (don’t have model # on me). Currently the return duct goes from the basement straight to the upstairs area …
Adding return duct on second floor? – GreenBuildingAdvisor
We have a bungalow, built in 1954 that probably had a gravity furnace to start. It’s had an addition, so upstairs is now three bedrooms, a bathroom, 2 large closets. There are 5 forced air vents upstairs and no returns. You can feel the air rushing down the stairs to the first floor, where it mixes with the 1st floor air and then finds the three return ducts on the first floor.
How To Add A Vent to Existing Ductwork – Upgraded Home
Step One: Using a template or the measurements from the vent you are using, go ahead and mark the hole into the main duct the size you need. Make sure it is at least 12 inches from the next vent and six inches from the edge of the duct. Step Two: Cut along the marks using a die grinder, Dremel, jigsaw, or tin snips.
Return Air Duct – DoItYourself.com Community Forums
Visit Spinny24’s homepage! “Supply and “Supply Duct” refer to conditioned air entering a room. “Return” and “Return Duct” refer to room air going back to the unit. 1. The first (closest to unit) return branch is 14″ for 494 CFM (480 FPM velocity) and the second is 12″ for 506 CFM (670 FPM).
Adding a Vent to Existing Ductwork: Pros, Cons and Costs
An Additional Vent Could Increase Home Value. Yes, add the vent as it will increase the value of your home at resale time (now or 20 years in future)! Try to make it as professional as possible. Handyman slap-dash results will detract value. (See Finding a Reliable, Safe and Affordable Handyman .)
HVAC Return Air Ducting is Important – AsktheBuilder.com
Supply air from furnaces and air conditioners should be on outside walls. The return air vent openings need to be on the opposite side of the room so the conditioned air is pulled across the room. If the supply ducts are in the floor, then the return air should be located up high. This pulls the air across your body.
How Many Return Air Vents Do I Need? – Upgraded Home
In a proper system, the air return vents send air through the return ducts where it goes through the air handler. The air handler sends the cleaned air back to the air conditioning or heating system where it is sent back through the supply vents. … Another option is to install a jumper duct. It is like a transfer grill, but it is done with …
How to Install a Return Air Duct | Hunker
Step 4: Add New Air Return Duct to Furnace. Cut a hole in the bottom of the return duct next to where the furnace is. This is where you’ll attach another duct that will run down and in to the furnace. Cut a hole in the side of the furnace that matches the size of your filter rack.
An Easy Retrofit for Return Air From Bedrooms – Energy Vanguard
The best use of the Perfect Balance * is in existing homes where you don’t have returns in the bedrooms and can’t (or don’t want to) install jumper ducts or transfer grilles. If the pressure in the bedroom with the door closed and the air handler running is higher than 3 Pa, this is a great way to retrofit a return air pathway.
Help with new duct and cold-air return installation – reddit
Supply air has 30x more effect on room temperatures and comfort than returns. If you are adding ducts – seal everything with mastic and make sure the pull the flex straight and cut off any excess. Sounds obvious, but don’t put duct in a space smaller than the duct. Thanks.
How To Install A Cold Air Return Duct Between Studs
Use a pencil to place marks on the bottom and top of the headers. The duct work should be placed through the opening you just created. Remember to add some insulation to the equation. This will provide you with the best results and help keep the air inside. The insulation can be sealed by utilizing metal foil tape.
A Guide to Understanding Return Air Ducts – Detmer and Sons
A person can be forgiven for not knowing much about their home’s air duct system. It plays a vital role in the home’s forced-air heating and cooling system, performing its job quietly and without much attention. The return air ducts in an HVAC system are especially liable to get taken for granted, even though their part in heating and cooling your home is just as essential as supply ducts.
Duct Work: Additional Return Air and Return Air Runs
The first step in solving air flow problems is to check how efficient your system is. In this case the system includes the furnace, coil and condenser along with the air filter, duct work, insulation and the supply and return registers. Once KEIL evaluates the capacity of your system, we can perform further testing to determine how to enhance …
Install an Air Duct to a Room – TwoFeetFirst
INSTALL AN AIR DUCT. The first thing you need to do is decide where the air duct will be placed. Then install the vent take-off off the main trunk line in that location. See the details of installing a vent take-off. Next, is putting the hole for the vent boot ( where the vent will sit ).
Can I reroute a return air duct if it adds length and several bends?
The return air duct , being on the negative side of the fan/blower , should have a lower resistance factor and thus be slightly larger than the supply duct to reduce air noise. – d.george. Jan 5, 2017 at 19:26 … Geometry Nodes – how i add a simple switch
What You Need to Know About Your Home’s Return Air Vents
Return air vent installation. A return air venting system can be installed in one of two ways: either every room with a supply register will also have a return air vent, or there can be centrally located return vents on each floor of your home. For a few different reasons, it’s better to have a return air vent in every room than it is to have …
How to Modify Cold Air Return Ducts for Efficient Heating and Cooling
Add New Cold Air Returns . Although it’s easier to modify cold air return ducts, adding new cold air returns so there’s one in every room is the best way to achieve balanced airflow in your home. This is not a task suitable for the average homeowner, and will likely require a qualified HVAC technician to complete the job.
Here are seven of the basic rules for getting your ducts in a row
Basic Rule No. 4: Map out your duct path to upper floors before you start cutting any holes. Ducts should be able to run between studs in the wall and then turn into a joist bay (the space between …
How to Relocate Ductwork to Knock Down a Wall – SF Gate
6. Connect the end of the flex duct onto the circular end of the rigid duct with self-tapping duct screws. Seal the connection with duct tape. Strap the flex duct to the attic framing at 4-foot …
Return Register InstallationAnd Best HVAC Performance – Modernize
Return Registers Boost Efficiency When They’re Placed Properly. HVAC professionals spend a ton of time learning about the scientific principles of airflow, currents, and pressure—so generally, they’re the ones you should turn to in order to diagnose duct flaws. Air moves in mysterious ways, so it’s possible you could completely …
Return air ducts keep homes cooler – HomeShow Radio
Return air ducts explained. Return air ducts running back to your A/C and furnace help circulate air throughout your home. While it’s a good idea having them in many rooms, your kitchen and bathroom are probably best left unreturned. Your HVAC system is basically a reticulating pump. As with any pump, you need to get supply back to it—in …
Should I Have Air Filters in My Home Vents? | Hunker
Vent filters can be added to your HVAC system at two locations: the return duct or the supply duct. Professionals tend to recommend a return duct filter more often than a supply duct filter, but some believe no vent filter is the best scenario for any HVAC system because of increased air resistance.
Seeking advice on adding HVAC air return ducts
Our contractor’s HVAC guy is proposing two solutions. 1. Add a second floor return, near the ceiling, in the center of the upstairs hallway. Increase first-floor return grille size. OR. 2. Add an additional downstairs return duct, and increase grille size on all return ducts, to an amount adequate for the whole house.
How To Install A Cold Air Return Duct Between Studs
Use a pencil to place marks on the bottom and top of the headers. The duct work should be placed through the opening you just created. Remember to add some insulation to the equation. This will provide you with the best results and help keep the air inside. The insulation can be sealed by utilizing metal foil tape.
How Many Return Air Vents Do I Need? – Upgraded Home
In a proper system, the air return vents send air through the return ducts where it goes through the air handler. The air handler sends the cleaned air back to the air conditioning or heating system where it is sent back through the supply vents. … Another option is to install a jumper duct. It is like a transfer grill, but it is done with …
Solved: return air duct – Autodesk Community
return air duct. i have a problem that i can’t find the answer of it , the problem is that i have FCU that is installed above false ceiling on corridor and proved air to room with supply duct , the return duct comes from the inlet of the FCU just to the wall and does not connect to any return diffuser ” free return ” when sizing the return duct …
Resource
https://www.ghac.com/blog/adding-second-return-almost-always-good-idea
https://www.doityourself.com/stry/how-to-install-a-return-air-duct
https://www.theductkings.com/air-duct-cleaning-services/how-to-install-return-air-duct/
https://diy.stackexchange.com/questions/145746/ramifications-of-adding-a-second-hvac-air-return-in-parallel
https://hvac-talk.com/vbb/threads/1315221-Can-I-add-4-more-return-ducts-to-an-existing-forced-air-system
https://www.greenbuildingadvisor.com/question/adding-return-duct-on-second-floor
https://upgradedhome.com/how-to-add-a-vent-to-existing-ductwork/
https://www.doityourself.com/forum/gas-oil-home-heating-furnaces/622359-return-air-duct.html
https://www.thedollarstretcher.com/home/adding-a-vent-to-existing-ductwork/
https://www.askthebuilder.com/hvac-return-air-ducting/
https://upgradedhome.com/how-many-return-air-vents-do-i-need/
https://www.hunker.com/13415847/how-to-install-a-return-air-duct
https://www.energyvanguard.com/blog/easy-retrofit-return-air-bedrooms/
https://www.reddit.com/r/HVAC/comments/3ii5vn/help_with_new_duct_and_coldair_return_installation/
https://www.theductkings.com/air-duct-cleaning-services/install-a-cold-air-return-duct-between-studs/
https://www.detmersons.com/return-air-ducts/
https://www.keilheatingandairconditioning.com/webapp/p/6/adding-additional-return-air-and-return-air-runs
https://www.twofeetfirst.net/install-air-duct/
https://diy.stackexchange.com/questions/105766/can-i-reroute-a-return-air-duct-if-it-adds-length-and-several-bends
https://www.jerrykelly.com/blog/what-you-need-to-know-about-your-homes-return-air-vents
https://www.sobieskiinc.com/blog/how-modify-cold-air-return-ducts-efficient-heating-and-cooling/
https://www.baltimoresun.com/news/bs-xpm-1992-07-04-1992186077-story.html
https://homeguides.sfgate.com/relocate-ductwork-knock-down-wall-32277.html
https://modernize.com/homeowner-resources/hvac/install-return-registers-best-hvac-performance
https://homeshowradio.com/weird-trick-keep-home-cooler-using-return-air/
https://www.hunker.com/12004000/should-i-have-air-filters-in-my-home-vents
https://www.houzz.com/discussions/6265294/seeking-advice-on-adding-hvac-air-return-ducts
https://www.theductkings.com/air-duct-cleaning-services/install-a-cold-air-return-duct-between-studs/
https://upgradedhome.com/how-many-return-air-vents-do-i-need/
https://forums.autodesk.com/t5/revit-mep-forum/return-air-duct/td-p/7932708